From: Luis Chamberlain <mcgrof@kernel.org>
To: linux-modules@vger.kernel.org, linux-kernel@vger.kernel.org,
pmladek@suse.com, david@redhat.com, petr.pavlu@suse.com,
prarit@redhat.com
Cc: christophe.leroy@csgroup.eu, song@kernel.org, mcgrof@kernel.org,
torvalds@linux-foundation.org
Subject: [RFC 09/12] module: extract patient module check into helper
Date: Fri, 10 Mar 2023 21:17:09 -0800 [thread overview]
Message-ID: <20230311051712.4095040-10-mcgrof@kernel.org> (raw)
In-Reply-To: <20230311051712.4095040-1-mcgrof@kernel.org>
The patient module check inside add_unformed_module() is large
enough as we need it. It is a bit hard to read too, so just
move it to a helper and do the inverse checks first to help
shift the code and make it easier to read. The new helper then
is module_patient_check_exists().
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
---
kernel/module/main.c | 71 +++++++++++++++++++++++++-------------------
1 file changed, 40 insertions(+), 31 deletions(-)
diff --git a/kernel/module/main.c b/kernel/module/main.c
index c3e5076c0436..e24323e2c499 100644
--- a/kernel/module/main.c
+++ b/kernel/module/main.c
@@ -2554,6 +2554,43 @@ static bool finished_loading(const char *name)
return ret;
}
+/* Must be called with module_mutex held */
+static int module_patient_check_exists(const char *name)
+{
+ struct module *old;
+ int err = 0;
+
+ old = find_module_all(name, strlen(name), true);
+ if (old == NULL)
+ return 0;
+
+ if (old->state == MODULE_STATE_COMING
+ || old->state == MODULE_STATE_UNFORMED) {
+ /* Wait in case it fails to load. */
+ mutex_unlock(&module_mutex);
+ err = wait_event_interruptible(module_wq,
+ finished_loading(name));
+ if (err)
+ return err;
+
+ /* The module might have gone in the meantime. */
+ mutex_lock(&module_mutex);
+ old = find_module_all(name, strlen(name), true);
+ }
+
+ /*
+ * We are here only when the same module was being loaded. Do
+ * not try to load it again right now. It prevents long delays
+ * caused by serialized module load failures. It might happen
+ * when more devices of the same type trigger load of
+ * a particular module.
+ */
+ if (old && old->state == MODULE_STATE_LIVE)
+ return -EEXIST;
+ else
+ return -EBUSY;
+}
+
/*
* We try to place it in the list now to make sure it's unique before
* we dedicate too many resources. In particular, temporary percpu
@@ -2562,41 +2599,14 @@ static bool finished_loading(const char *name)
static int add_unformed_module(struct module *mod)
{
int err;
- struct module *old;
mod->state = MODULE_STATE_UNFORMED;
mutex_lock(&module_mutex);
- old = find_module_all(mod->name, strlen(mod->name), true);
- if (old != NULL) {
- if (old->state == MODULE_STATE_COMING
- || old->state == MODULE_STATE_UNFORMED) {
- /* Wait in case it fails to load. */
- mutex_unlock(&module_mutex);
- err = wait_event_interruptible(module_wq,
- finished_loading(mod->name));
- if (err)
- goto out_unlocked;
-
- /* The module might have gone in the meantime. */
- mutex_lock(&module_mutex);
- old = find_module_all(mod->name, strlen(mod->name),
- true);
- }
-
- /*
- * We are here only when the same module was being loaded. Do
- * not try to load it again right now. It prevents long delays
- * caused by serialized module load failures. It might happen
- * when more devices of the same type trigger load of
- * a particular module.
- */
- if (old && old->state == MODULE_STATE_LIVE)
- err = -EEXIST;
- else
- err = -EBUSY;
+ err = module_patient_check_exists(mod->name);
+ if (err)
goto out;
- }
+
mod_update_bounds(mod);
list_add_rcu(&mod->list, &modules);
mod_tree_insert(mod);
@@ -2604,7 +2614,6 @@ static int add_unformed_module(struct module *mod)
out:
mutex_unlock(&module_mutex);
-out_unlocked:
return err;
}
--
2.39.1
next prev parent reply other threads:[~2023-03-11 5:17 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-11 5:17 [RFC 00/12] module: avoid userspace pressure on unwanted allocations Luis Chamberlain
2023-03-11 5:17 ` [RFC 01/12] module: use goto errors on check_modinfo() and layout_and_allocate() Luis Chamberlain
2023-03-11 5:17 ` [RFC 02/12] module: move get_modinfo() helpers all above Luis Chamberlain
2023-03-11 5:17 ` [RFC 03/12] module: rename next_string() to module_next_tag_pair() Luis Chamberlain
2023-03-11 5:17 ` [RFC 04/12] module: add a for_each_modinfo_entry() Luis Chamberlain
2023-03-11 5:17 ` [RFC 05/12] module: add debugging alias parsing support Luis Chamberlain
2023-03-11 5:17 ` [RFC 06/12] module: move early sanity checks into a helper Luis Chamberlain
2023-03-11 5:17 ` [RFC 07/12] module: move check_modinfo() early to early_mod_check() Luis Chamberlain
2023-03-11 5:17 ` [RFC 08/12] module: move finished_loading() Luis Chamberlain
2023-03-11 5:17 ` Luis Chamberlain [this message]
2023-03-11 5:17 ` [RFC 10/12] module: avoid allocation if module is already present and ready Luis Chamberlain
2023-03-11 5:17 ` [RFC 11/12] module: use list_add_tail_rcu() when adding module Luis Chamberlain
2023-03-11 5:17 ` [RFC 12/12] module: use aliases to find module on find_module_all() Luis Chamberlain
2023-03-15 14:43 ` Petr Pavlu
2023-03-15 16:12 ` Luis Chamberlain
2023-03-15 12:24 ` [RFC 00/12] module: avoid userspace pressure on unwanted allocations David Hildenbrand
2023-03-15 16:10 ` Luis Chamberlain
2023-03-15 16:41 ` David Hildenbrand
2023-03-16 23:55 ` Luis Chamberlain
2023-03-16 23:56 ` Luis Chamberlain
2023-03-18 0:11 ` Luis Chamberlain
2023-03-20 9:38 ` David Hildenbrand
2023-03-20 19:40 ` David Hildenbrand
2023-03-20 21:09 ` Luis Chamberlain
2023-03-20 21:15 ` David Hildenbrand
2023-03-20 21:23 ` Luis Chamberlain
2023-03-20 21:27 ` Luis Chamberlain
2023-03-21 19:32 ` David Hildenbrand
2023-03-24 9:27 ` David Hildenbrand
2023-03-24 17:54 ` Luis Chamberlain
2023-03-24 19:11 ` Linus Torvalds
2023-03-24 19:59 ` Luis Chamberlain
2023-03-24 20:28 ` Linus Torvalds
2023-03-24 21:14 ` Luis Chamberlain
2023-03-24 23:27 ` Luis Chamberlain
2023-03-24 23:41 ` Linus Torvalds
2023-03-28 3:44 ` David Hildenbrand
2023-03-28 6:16 ` Luis Chamberlain
2023-03-28 21:02 ` David Hildenbrand
2023-03-29 5:31 ` Luis Chamberlain
2023-03-30 4:42 ` David Hildenbrand
2023-03-21 15:11 ` David Hildenbrand
2023-03-21 16:52 ` Luis Chamberlain
2023-03-21 17:01 ` David Hildenbrand
2023-03-20 9:37 ` David Hildenbrand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230311051712.4095040-10-mcgrof@kernel.org \
--to=mcgrof@kernel.org \
--cc=christophe.leroy@csgroup.eu \
--cc=david@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-modules@vger.kernel.org \
--cc=petr.pavlu@suse.com \
--cc=pmladek@suse.com \
--cc=prarit@redhat.com \
--cc=song@kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).