[PATCH kmod v2 11/17] man: modprobe.d: document the config file order handling

[Emil Velikov via B4 Relay <devnull+emil.l.velikov.gmail.com@kernel.org>]

From: Emil Velikov <emil.l.velikov@gmail.com>

The modprobe.d configuration order/handling aligns with existing tools
such as sysctl.d, even though there is no mention in the manual.

Reorder the list in SYNOPSIS and add a bit of verbiage describing things.

Section is inspired by sysctl.d(5) and sysctl(8).

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
---
v2: Reword as per Lucas' suggestion.
---
 man/modprobe.d.5.scd | 29 ++++++++++++++++++++---------
 1 file changed, 20 insertions(+), 9 deletions(-)

diff --git a/man/modprobe.d.5.scd b/man/modprobe.d.5.scd
index 2907175..2a6a789 100644
--- a/man/modprobe.d.5.scd
+++ b/man/modprobe.d.5.scd
@@ -6,25 +6,24 @@ modprobe.d - Configuration directory for modprobe
 
 # SYNOPSIS
 
-/lib/modprobe.d/\*.conf
+@SYSCONFDIR@/modprobe.d/\*.conf
 
-@DISTCONFDIR@/modprobe.d/\*.conf
+/run/modprobe.d/\*.conf
 
 /usr/local/lib/modprobe.d/\*.conf
 
-/run/modprobe.d/\*.conf
+@DISTCONFDIR@/modprobe.d/\*.conf
 
-/etc/modprobe.d/\*.conf
+/lib/modprobe.d/\*.conf
 
 # DESCRIPTION
 
 Because the *modprobe* command can add or remove more than one module, due to
 modules having dependencies, we need a method of specifying what options are to
-be used with those modules. All files underneath the /etc/modprobe.d directory
-which end with the .conf extension specify those options as required. They can
-also be used to create convenient aliases: alternate names for a module, or they
-can override the normal *modprobe* behavior altogether for those with special
-requirements (such as inserting more than one module).
+be used with those modules. One can also use them to create convenient aliases:
+alternate names for a module, or they can override the normal *modprobe*
+behavior altogether for those with special requirements (such as inserting more
+than one module).
 
 Note that module and alias names (like other module names) can have - or \_ in
 them: both are interchangeable throughout all the module commands as underscore
@@ -35,6 +34,18 @@ lines and lines starting with '#' ignored (useful for adding comments). A '\\'
 at the end of a line causes it to continue on the next line, which makes the
 file a bit neater.
 
+# CONFIGURATION DIRECTORIES AND PRECEDENCE
+
+Configuration files are read from directories in listed in SYNOPSYS in that
+order of precedence. Once a file of a given filename is loaded, any file of the
+same name in subsequent directories is ignored.
+
+All configuration files are sorted in lexicographic order, regardless of the
+directory they reside in. Configuration files can either be completely replaced
+(by having a new configuration file with the same name in a directory of higher
+priority) or partially replaced (by having a configuration file that is ordered
+later).
+
 # COMMANDS
 
 alias _wildcard_ _modulename_

-- 
2.45.2