RV: Serial printer problem

["Miguel A. Rasero" <tecnico@bareacomunicaciones.com>]

I have tested this:

	stty -F /dev/ttyS0 crtscts
	
	setserial /dev/ttyS0 uart 16450

And in ms-dos: mode com1:96,n,8,1,p

But i have the same problem yet, all works fine if the report it´s short
but when it has more lines (>25) it stops the printing, i have tested
from the linux directly with cat /etc/hosts > /dev/ttyS0 in a large
hosts file but it works good, anyone can help me please?

-----Mensaje original-----
De: linux-msdos-owner@vger.kernel.org
[mailto:linux-msdos-owner@vger.kernel.org] En nombre de Miguel A. Rasero
Enviado el: domingo, 13 de julio de 2003 3:14
Para: linux-msdos@vger.kernel.org
Asunto: Serial printer problem


Hi, i have installed dosemu dosemu-1.0.2.1 and 
configure dosemu.conf to get direct access to 
/dev/ttyS0, then i configure in dosemu the com1 port 
with the "mode com1:9600,n,8,1,p" when i print it 
works fine but when i print anything large, i am using 
a pos printer, when i print a simple ticket works fine 
and cut the paper too, but when i print the whole day 
sales resume, the printer begins to print the lines 
upon others and doesn´t cut the paper, do you know what 
can be the problem? the printer and the program that i 
am using for pos has been tested in a normal ms-dos 
Computer.

I have other problem, i can´t use the (Ntilde) (Ñ) from 
dosemu, do you know any way to do this?

Thanks by the help and sorry for my poor english 

-
To unsubscribe from this list: send the line "unsubscribe linux-msdos"
in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

-
To unsubscribe from this list: send the line "unsubscribe linux-msdos" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html