* dosemu-1.1.0 help
@ 2003-10-01 22:50 Serge Naggar
2003-10-01 23:59 ` Bart Oldeman
0 siblings, 1 reply; 3+ messages in thread
From: Serge Naggar @ 2003-10-01 22:50 UTC (permalink / raw)
To: linux-msdos
Installed the new 1.1.9 but it seems to not see the operating system in
both cases and the vga fonts when started with xdosemu.
I rpm'ed the dosemu then used the dosemu-freedos...tgz and dosemu...tgz.
--
Cheers,
Serge
Naggar Consulting
[life is yours to make]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: dosemu-1.1.0 help
2003-10-01 22:50 dosemu-1.1.0 help Serge Naggar
@ 2003-10-01 23:59 ` Bart Oldeman
2003-10-03 5:17 ` Serge Naggar
0 siblings, 1 reply; 3+ messages in thread
From: Bart Oldeman @ 2003-10-01 23:59 UTC (permalink / raw)
To: Serge Naggar; +Cc: linux-msdos
On Wed, 1 Oct 2003, Serge Naggar wrote:
> Installed the new 1.1.9 but it seems to not see the operating system in
> both cases and the vga fonts when started with xdosemu.
>
> I rpm'ed the dosemu then used the dosemu-freedos...tgz and dosemu...tgz.
Please state exactly what you did and what you saw on the screen.
su
rpm -i dosemu*.rpm
exit
xdosemu
should work after a small q&a session. Similarly the tarballs if you
follow the instructions in README.bindist.
Also try to run
xdosemu -D+dD -o log
that should make clear why dosemu couldn't find the DOS.
Hmm I wonder, do you have any old /etc/dosemu.users and /etc/dosemu.conf
files lying around? If yes, then try to rename or delete them.
Bart
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: dosemu-1.1.0 help
2003-10-01 23:59 ` Bart Oldeman
@ 2003-10-03 5:17 ` Serge Naggar
0 siblings, 0 replies; 3+ messages in thread
From: Serge Naggar @ 2003-10-03 5:17 UTC (permalink / raw)
To: Bart Oldeman; +Cc: linux-msdos
Hi Bart,
with your reply I decided to try again but with the same results - so I
went back to 1.1.5 and ... was welcomed by 1.1.9 - go figure. I looks as
if the two are somewhat intertwined with 1.1.9 wanting to insert itself
into /root from /home/ areas.
I had 0 /etc/dosemu.users files and 1 /etc/dosemu.conf file.
I had rename the dosemu-1.1.5 directories/files as old-dosemu...
The 1.1.9 errors were:
ERROR: x: unable to open font vga Error: trying "vga"
" x: " " vga " " "9x15"
You do not have dosemu vga font installed & are running remote x. You
need to install the vga font on your local server. Look @the readme for
details. For now we start with a fixed font which does not display all
................... be warned.
I had already deleted the 1.1.9 so could not run xdosemu -D+dD -o log.
I'll try to reinstall soon.
What do you make of 1.1.9 intruding on the 1.1.5 install?
I guess I didn't delete all its references and it is there?
On Wed, 2003-10-01 at 19:59, Bart Oldeman wrote:
> On Wed, 1 Oct 2003, Serge Naggar wrote:
>
> > Installed the new 1.1.9 but it seems to not see the operating system in
> > both cases and the vga fonts when started with xdosemu.
> >
> > I rpm'ed the dosemu then used the dosemu-freedos...tgz and dosemu...tgz.
>
> Please state exactly what you did and what you saw on the screen.
>
> su
> rpm -i dosemu*.rpm
> exit
> xdosemu
>
> should work after a small q&a session. Similarly the tarballs if you
> follow the instructions in README.bindist.
>
> Also try to run
> xdosemu -D+dD -o log
> that should make clear why dosemu couldn't find the DOS.
>
> Hmm I wonder, do you have any old /etc/dosemu.users and /etc/dosemu.conf
> files lying around? If yes, then try to rename or delete them.
>
> Bart
--
Cheers,
Serge
Naggar Consulting
[life is yours to make]
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2003-10-03 5:17 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-10-01 22:50 dosemu-1.1.0 help Serge Naggar
2003-10-01 23:59 ` Bart Oldeman
2003-10-03 5:17 ` Serge Naggar
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox