public inbox for linux-msdos@vger.kernel.org
 help / color / mirror / Atom feed
From: Ryan Underwood <nemesis-lists@icequake.net>
To: linux-msdos@vger.kernel.org
Subject: Re: Serial printer problem
Date: Mon, 14 Jul 2003 12:06:45 -0500	[thread overview]
Message-ID: <20030714170645.GN1031@dbz.icequake.net> (raw)
In-Reply-To: <000001c34a10$b2da02b0$0500a8c0@skuda>


Miguel,

Are you root when you run dosemu (or using sudo)?  Direct port access
needs root.

Ryan

On Mon, Jul 14, 2003 at 04:03:25PM +0200, Miguel A. Rasero wrote:
> Hi Ryan,
> 
> When i try to do direct access like you say, ms-dos gives me an error
> that com1 isn?t a valid name device.
> 
> 
> 
> Hi Miguel,
> 
> On Mon, Jul 14, 2003 at 02:12:32AM +0200, Miguel A. Rasero wrote:
> > Hi ryan
> >  I have saw the charset options in the new technical readme in the
> > development versions but i have not tested yet because i am having
> very
> > trouble with the printer that it?s more important to me, well i take
> to
> > 5 hours proving options with setserial and stty, i realized wich when
> i
> > tried a "cat largefile > /dev/ttyS0" in linux i had the same result,
> and
> > the end of the printed page character disorder and not the whole file
> > printed, i had tested the closing_wait "infinite" like i saw in the
> > printing howto but it didn?t worked, i found in a old newsgroup a
> > message that recommends this.
> > stty -F /dev/ttyS0 opost onlcr tab3 crtscts
> > setserial /dev/ttyS0 uart 16450
> 
> Hmm, what kind of motherboard/serial card do you have (does it really
> only
> have a 16450 on it?) and what kind of printer is this?
> 
> > in doc but i don?t understand very well, i need that the dos knows
> which
> > is com1, it doesn?t works if i add to the ports list 0x3f8 without say
> > it that it?s com1.
> 
> Yeah, you need to add 0x3f8 to $_ports, and probably 4 to $_irqpassing
> assuming it is on the standard COM1 port.  That should accomplish the
> direct access to com1.  Remember to remove anything from "$_com1" that
> you put in there.
> 
> -- 
> Ryan Underwood, <nemesis at icequake.net>, icq=10317253
> -
> To unsubscribe from this list: send the line "unsubscribe linux-msdos"
> in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-msdos" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

-- 
Ryan Underwood, <nemesis at icequake.net>, icq=10317253

  reply	other threads:[~2003-07-14 17:06 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-07-14  0:12 RV: Serial printer problem Miguel A. Rasero
2003-07-14  1:50 ` Ryan Underwood
2003-07-14 14:03   ` Miguel A. Rasero
2003-07-14 17:06     ` Ryan Underwood [this message]
2003-07-14 20:54       ` Miguel A. Rasero
  -- strict thread matches above, loose matches on Subject: below --
2003-07-13  1:13 Miguel A. Rasero
2003-07-14  2:56 ` Mike Keithley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20030714170645.GN1031@dbz.icequake.net \
    --to=nemesis-lists@icequake.net \
    --cc=linux-msdos@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox