From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jens Strohschnitter Subject: Re: No printing via lprng with Dosemu 1.3.1 Date: Tue, 25 Jan 2005 10:37:32 +0100 Message-ID: <20050125103732.454de600.mlist-dos@rwz.de> References: <20050124154900.00002147@STROHSJE-NBK> <41F57A9C.9000908@nf.sympatico.ca> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <41F57A9C.9000908@nf.sympatico.ca> Sender: linux-msdos-owner@vger.kernel.org List-Id: Content-Type: text/plain; charset="us-ascii" To: DosEmu Mailinglist > > > Jens Strohschnitter wrote: > > >Hi list, > > > >I have problems while using lprng with dosemu 1.3.1. > >In my printcap I have added the following lines: > > > >pr-fra19|remote printer on pr-fra19:\ > > :sd=/var/spool/lpd/pr-fra19:\ > > :rm=pr-fra19:\ > > :rp=text:\ > > :bk:sh:mx#0: > > > >The dosemu.conf looks like: > > > >$_printer = "pr-fra19" > >$_printer_command = "lpr" > > > >But when I try to print from a application running underdosemu, nothing happens. > >So I have started the dosemu with a logfile (dosemu.bin +D-a+w+p -o /tmp/dos.log) and found following lines: > > > >LPT: initializing printer <> > >LPT: initializing printer <> > >LPT: initializing printer <> > >LPT: print to non-defined printer LPT3 > >LPT: print to non-defined printer LPT2 > >LPT: init printer 0 > > > >The printer is plugged on a printbox, that is connected via ethernet with the LAN > >A testprint from linux (lpr -Ppr-fra19 /etc/xxx) works fine. > > > >Hope someone can help me to fix this problem. A running dosemu (1.1.3-5) works fine under SuSE 7.2 / 2.4.16. But > >now we have to use SLES9 from SuSE with Kernel 2.6.5-XXX. > > lpr command should be "lpr -l" if you are using cups Hi out there, no, I am using lprng in Version 3.9.x. I have tried out lpr -l but nothing happens. Are the entries in the debuglog (LPT: initializing printer <>) ok ? -- Regards, Jens Strohschnitter ------------------------------------- *!!!LINUX LINUX LINUX LINUX LINUX!!!* * http://www.jens-strohschnitter.de * ------------------------------------- Set the controls for the heart of the sun -------------------------------------