From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ryan Underwood Subject: Re: sound support (Re: XMS problem with Aladdin demo) Date: Wed, 9 Mar 2005 13:48:08 -0600 Message-ID: <20050309194808.GR11254@dbz.icequake.net> References: <422F3187.3070909@aknet.ru> <422F484D.9040905@zgod.cjb.net> Mime-Version: 1.0 Content-Disposition: inline In-Reply-To: <422F484D.9040905@zgod.cjb.net> Sender: linux-msdos-owner@vger.kernel.org List-Id: Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-msdos@vger.kernel.org On Wed, Mar 09, 2005 at 08:02:37PM +0100, Julius Schwartzenberg wrote: > > When I set up the OPL3 chip in Linux, I specified it should use port > 0x388 and not another port. I'm able to change this port to something > else through the module settings. Would it be a good idea to change this > value? Most programs that want an Adlib or OPL3 chip expect the port to be 0x388. Only programs which used the dual-OPL2 of SBPro usually use 0x220, and these are very rare. Only program I know of that uses 0x228 is sb-sound.com. So 0x388 is the best setting for now. I can't explain your other problems until I test this myself. -- Ryan Underwood,