Re: tcp/ip + samba + dosemu

["Rafał Cygnarowski" <zswi@pers.pl>]

> Rafał Cygnarowski wrote:
> > Honestly... I will not care about Waterloo TCP/IP unless there be some
> > samba client which uses packet driver :( Do you know such client? Or how
> > to connect to samba server using eg. LanManager?
>
> I think the only way is what you are already trying -
> odihlp. I looked up a couple of your messages but haven't
> found how it fails for you. The only problem I can remember
> getting it to work myself was that it required the very latest
> version of pdether which was difficult to find in the net.

I found it: pdether v1.05 - pde105.zip somewhere... :) 
I don't remember now where.

My tries (current tries):

A. Environment:

- MSClient from ftp://ftp.microsoft.com/bussys/Clients/MSCLIENT
- dosemu-1.3.3-1.i686
- kernel-2.6.16.20-1.athlon
- guest OS: MS-DOS 6.20
- pdether v1.05
- lsl.com v2.20 from Novell Client for DOS 
(http://www.novell.com/coolsolutions/tools/downloads/dw271e.zip)
- odihlp.exe from Windows for Workgroups 3.11

B. How it is started?

1. config.sys content:

DEVICE=C:\NET\ifshlp.sys
DEVICE=C:\NET\PROTMAN.DOS /i:C:\NET
REM - in normal situation here should be NDIS driver loaded
DEVICE=C:\NET\nemm.dos
DEVICE=C:\NET\tcpdrv.dos /i:C:\NET

and output produced:
Microsoft DOS TCP/IP NEMM Driver 1.0
Microsoft DOS TCP/IP Protocol Driver 1.0a
Copyright (c) Microsoft Corporation, 1991.  All rights reserved.
Copyright (c) Hewlett-Packard Corporation, 1985-1991.  All rights reserved.
Copyright (c) 3Com Corporation, 1985-1991.  All rights reserved.

2. c:\net\net initialize
The command completed successfully.

3. c:\net\lsl
Novell Link Support Layer for DOS ODI  v2.20 (960401)
(c) Copyright 1990 - 1996, by Novell, Inc. All rights reserved.
 
BUFFERS 8 1600
The configuration file used was "C:\NET\NET.CFG".
Max Boards 4, Max Stacks 4
Buffers 8, Buffer size 1600 bytes, Memory pool 0 bytes.

4. c:\net\pdether
Ethernet Packet Driver MLID, v1.05, built Mar 20 1995 at 12:55:52
PDEther installed successfully.

5. c:\net\odihlp.exe
Microsoft WorkGroups ODI/NDIS3 Mapper Version 1.0
Copyright (C) Microsoft Corporation 1993
  Powiązany z adapterem: PDETHER

6. c:\net\netbind.com
MS-DOS LAN Manager v2.1 Netbind
Error: 33 Unable to bind.
^^^^^^^^^^^^^^^^^^^^^^^^^
And here problem starts. Acording to 
http://service1.symantec.com/SUPPORT/ghost.nsf/docid/1998090116540425 
it's some kind of problem with my config files. Document above describes error 
messages for netbind.exe which comes from another software - I hope these 
messages are equal.

C. Config files

1. c:\net\net.cfg

Link Support
	Buffers 8 1600
Link Driver PDETHER
	Int 60
	Frame Ethernet_II
	Protocol IP 800 Ethernet_II
	Protocol ARP 806 Ethernet_II
	Protocol RARP 8035 Ethernet_II

2. c:\net\protocol.ini

[network.setup]
version=0x3110
netcard=ms$odimac,1,MS$ODIMAC,4
transport=ms$ndishlp,MS$NDISHLP
transport=tcpip,TCPIP
lana0=ms$odimac,1,ms$ndishlp
lana1=ms$odimac,1,tcpip

[TCPIP]
NBSessions=6
SubNetMask0=255 0 0 0
IPAddress0=0 0 0 0
DisableDHCP=0
DriverName=TCPIP$
BINDINGS=pdether
LANABASE=1

[protman]
DriverName=PROTMAN$
PRIORITY=MS$NDISHLP

[MS$NDISHLP]
DriverName=ndishlp$
BINDINGS=pdether

[net.cfg]
PATH=C:\net\net.cfg

[MS$ODIMAC]

[pdether]
DriverName=PDETHER$

[Link Driver PDETHER]
data=Frame Ethernet_II
data=Link Driver PDETHER

3. c:\net\system.ini

[network]
sizworkbuf=1498
filesharing=no
printsharing=no
autologon=yes
computername=TESTER
lanroot=C:\NET
username=TESTER
workgroup=WORKGROUP
reconnect=yes
dospophotkey=N
lmlogon=0
logondomain=WORKGROUP
preferredredir=full
autostart=full
maxconnections=8

[network drivers]
; netcard=elnk.dos -- original driver
transport=ndishlp.sys,tcpdrv.dos,nemm.dos
devdir=C:\NET
LoadRMDrivers=yes

[386enh]
TimerCriticalSection=5000
UniqueDosPSP=TRUE
PSPIncrement=2

[Password Lists]
*Shares=C:\NET\Shares.PWL

-- 
Rafał Cygnarowski
rafi@pers.pl
-
To unsubscribe from this list: send the line "unsubscribe linux-msdos" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html