From: John Coppens <john@jcoppens.com>
To: linux-msdos@vger.kernel.org
Subject: Cannot run Freepascal compiler under DOSemu
Date: Mon, 5 Apr 2010 19:55:23 -0300 [thread overview]
Message-ID: <20100405195523.d15d76c6.john@jcoppens.com> (raw)
Hi all.
I'm running the 32-bit DOSemu binary on an AMD64 system, and by far most
applications run fine. I have trouble with the Freepascal compiler though.
Both its installer and the actual compiler fail.
In the case of the compiler, running it without parameters gives the
command line options. This works fine. When a source file is specified,
DOSemu aborts with the message below. Do I have to modify the conf file?
I have tried several changes, none make any difference.
I'd appreciate suggestions!
John
Output from DOSemu:
ERROR: Fault handler re-entered! signal=11 _trapno=0xE
ERROR: cpu exception in dosemu code outside of DPMI client!
trapno: 0x0e errorcode: 0x00000007 cr2: 0x00000000
eip: 0x004a2cc1 esp: 0x7fff16e2d270 eflags: 0x00010202
cs: 0x0033 ds: 0x013f es: 0x013f ss: 0x002b
ERROR: Please report the contents of ~/.dosemu/boot.log at
http://sourceforge.net/tracker/?atid=457447&group_id=49784&func=browse
It would be even more helpful if would recompile DOSEMU and reproduce this
bug with "debug on" in compiletime-settings.
Page fault: write instruction to linear address: 0x00000000
CPU was in user mode
Exception was caused by insufficient privilege
next reply other threads:[~2010-04-05 22:55 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-05 22:55 John Coppens [this message]
2010-04-06 16:13 ` Cannot run Freepascal compiler under DOSemu solarflow99
[not found] ` <20100406224510.210adb03.john@jcoppens.com>
[not found] ` <p2u7020fd001004070928g2a4b99f5ved234a83954cf73c@mail.gmail.com>
[not found] ` <20100408010643.c1c3242b.john@jcoppens.com>
2010-04-08 16:21 ` solarflow99
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100405195523.d15d76c6.john@jcoppens.com \
--to=john@jcoppens.com \
--cc=linux-msdos@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox