From: Mark S Bilk <mark@cosmicpenguin.com>
To: linux-msdos@vger.kernel.org
Subject: dosemu error -- LOWRAM mmap: Invalid argument
Date: Wed, 7 Apr 2010 09:02:58 -0700 [thread overview]
Message-ID: <20100407160258.GC24445@isis> (raw)
When I run dosemu I get these error messages:
LOWRAM mmap: Invalid argument
Segmentation fault
I have already done this as root -- recommended as the
solution for this problem -- but it doesn't help:
echo 0 > /proc/sys/vm/mmap_min_addr
and "cat /proc/sys/vm/mmap_min_addr" now prints 0
(I think it was originally something like 65536).
The dosemu version is 1.4.0.1, installed from an OpenSuse rpm.
I'm running OpenSuse Linux 11.2, kernel 2.6.31.12-0.1-desktop,
which is a 32-bit system.
I get those error messages whether I run dosemu in an xterm
or a Linux text console.
My CPU is an AMD Athlon XP 2800+ dual-core 64 bit.
This is my first time running dosemu.
Here's my boot.log:
CONF: config variable parser_version_3 set
CONF: config variable c_system set
CONF: Parsing built-in dosemu.conf file.
CONF: config variable version_3_style_used set
CONF: Parsing built-in global.conf file.
CONF: config variable version_3_style_used unset
CONF: config variable version_3_style_used set
CONF: opened include file /etc/dosemu/dosemu.conf
CONF: closed include file /etc/dosemu/dosemu.conf
CONF: opened include file /home/msb/.dosemurc
CONF: closed include file /home/msb/.dosemurc
CONF: config variable skip_dosrc set
CONF: mapping driver = 'auto'
debug flags: -a+cw
CONF: Disabling use of pentium timer
CONF: dosbanner on
CONF: timer freq=18, update=54925
CONF: CPU set to 586
CONF: JIT CPUEMU set to 0 for 586
CONF: 2048k bytes EMS memory
CONF: EMS-frame = 0xe400
CONF: DPMI-Server on (0x5000)
CONF: DPMI base addr = 0xffffffff
CONF: PM DOS API Translator on
CONF: No DJGPP NULL deref checks: off
CONF: dosemu running on X
CONF: x keycode 2 mode13fact 2 gamma 100 font '' mgrab_key "Home"
CONF: time mode = 'bios'
SER: directory /var/lock namestub LCK.. binary No
MOUSE: no device specified, type 0 using internaldriver: yes, emulate3buttons: no baudrate: 0
CONF: Keyboard-layout keyb-user
CONF: **** Warning: floppy /dev/fd0 not accessable, disabled
CONF: fastfloppy = 1
CONF: IPX support off
CONF(LPT0) f: (null) c: lpr -l t: 20 port: 0
CONF(LPT1) f: (null) c: lpr -l -P lpt2 t: 20 port: 0
CONF: not allowing speaker port access
CONF: Packet Driver enabled.
device: /home/msb/.dosemu/drives/c type 4 h: -1 s: -1 t: -1 drive C:
device: /home/msb/.dosemu/drives/d type 4 h: -1 s: -1 t: -1 drive D:
CONF: cdrom MSCD0001 on /dev/cdrom
CONF: config variable c_system unset
Linux kernel 2.6.31; CPU speed is 2712433000 Hz
CPU-EMU speed is 2712 MHz
CONF: mostly running as USER: uid=1000 (cached 1000) gid=100 (cached 100)
DBG_FD already set
DOSEMU-1.4.0.1 is coming up on Linux version 2.6.31.12-0.1-desktop #1 SMP PREEMPT 2010-01-27 08:20:11 +0100 i686
Compiled with GCC version 4.4.0 -m32
CONF: reserving 640Kb at 0x00000 for 'd' (Base DOS memory (first 640K))
CONF: reserving 48Kb at 0xF4000 for 'r' (Dosemu reserved area)
CONF: reserving 128Kb at 0xA0000 for 'v' (Video memory)
CONF: reserving 8256Kb at 0x100000 for 'x' (Extended memory (HMA+XMS))
********************
next reply other threads:[~2010-04-07 16:02 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-07 16:02 Mark S Bilk [this message]
2010-04-17 20:28 ` dosemu error -- LOWRAM mmap: Invalid argument Danilo Godec
2010-04-20 12:33 ` Mark S Bilk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100407160258.GC24445@isis \
--to=mark@cosmicpenguin.com \
--cc=linux-msdos@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox