From mboxrd@z Thu Jan  1 00:00:00 1970
From: Lars =?iso-8859-1?Q?Bj=F8rndal?= <lars@lamasti.net>
Subject: Re: A video problem
Date: Sat, 25 Oct 2014 15:32:43 +0200
Message-ID: <20141025133243.GI1862@lamasti.net>
References: <m3bnsuwaay.fsf@dalen.lamasti.net>
Mime-Version: 1.0
Content-Transfer-Encoding: QUOTED-PRINTABLE
Return-path: <linux-msdos-owner@vger.kernel.org>
Content-Disposition: inline
In-Reply-To: <m3bnsuwaay.fsf@dalen.lamasti.net>
Sender: linux-msdos-owner@vger.kernel.org
List-ID: <linux-msdos.vger.kernel.org>
Content-Type: text/plain; charset="iso-8859-1"
To: linux-msdos <linux-msdos@vger.kernel.org>

Hello

It's really important to me to get dosemu to work, if possible. Hope
someone can help. I tried to start dosemu after booting the machine
with the kernel parameters "console=3Dtty0 nomodeset vga=3Dnormal"
removed. Then dosemu starts, but on my braille display (I need it
because I'm blind), I then get: Screen is not in text mode. For
further details, look below.

Lars

On Sat, Jul 12, 2014 at 11:12:53PM +0200, Lars Bj=F8rndal wrote:
> Hello list
>=20
> I've used dosemu for years, and it has worked perfectly. After some
> upgrades and hardware replacements, I cannot get dosemu to work any m=
ore. As
> I always use console and never use GUI, I have the following kernel
> command line: "console=3Dtty0 nomodeset vga=3Dnormal". So I don't hav=
e any
> framebuffer.
>=20
> I use Fedora 20, and have the package
> dosemu-1.4.0.8-18.20131022git.fc20.x86_64 installed. When I run dosem=
u
> with the -s flag, I get the following error messages:
>=20
> Running as root in full feature mode
> ERROR: SDL: No available video device
> ERROR: PORT: conflicting devices: VGAEmu VGA Controller & extra stuff
> for port 0
> x3c0
> ERROR: PORT: conflicting devices: VGAEmu CRT Controller & video port =
io
> for port
>  0x3d4
> ERROR: PORT: conflicting devices: VGAEmu Input Status #1/Feature Cont=
rol
> & extra
>  stuff for port 0x3da
> ERROR: PORT: conflicting devices: VGAEmu Mono/Hercules Card Range 0 &
> video port
>  io for port 0x3b4
> ERROR: PORT: conflicting devices: VGAEmu Mono/Hercules Card Range 1 &
> extra stuff for port 0x3bf
>=20
> Some output from lshw is:
>=20
>         *-display:0 UNCLAIMED
>              description: VGA compatible controller
>              product: 82Q963/Q965 Integrated Graphics Controller
>              vendor: Intel Corporation
>              physical id: 2
>              bus info: pci@0000:00:02.0
>              version: 02
>              width: 64 bits
>              clock: 33MHz
>              capabilities: msi pm vga_controller cap_list
>              configuration: latency=3D0
>              resources: memory:fea00000-feafffff
>              memory:d0000000-dfffffff ioport
> :ecb8(size=3D8)
>         *-display:1 UNCLAIMED
>              description: Display controller
>              product: 82Q963/Q965 Integrated Graphics Controller
>              vendor: Intel Corporation
>              physical id: 2.1
>              bus info: pci@0000:00:02.1
>              version: 02
>              width: 32 bits
>              clock: 33MHz
>              capabilities: pm bus_master cap_list
>              configuration: latency=3D0
>              resources: memory:feb00000-febfffff
>=20
> Will it be possibel for me to run dosemu without enabling framebuffer
> support? If yes, what configuration parameters do I need to insert in=
to
> my /etc/dosemu/dosemu.conf file?
>=20
> Thanks and regards,
> Lars
--
To unsubscribe from this list: send the line "unsubscribe linux-msdos" =
in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html