From: Johan Gill <johane@lysator.liu.se>
To: stas.orel@mailcity.com
Cc: linux-msdos@vger.kernel.org
Subject: Re: What's up with Space Quest 2?
Date: Wed, 12 Jun 2002 23:56:25 +0200 [thread overview]
Message-ID: <3D07C389.7080809@lysator.liu.se> (raw)
In-Reply-To: 3D078C5C.7070507@yahoo.com
[-- Attachment #1: Type: text/plain, Size: 458 bytes --]
Stas Sergeev wrote:
> How good is it without any patches?
> Does it work on dosemu-1.0.2.1?
> It seems to use DMA before crash,
> does it make sense if you disable
> sound in program's setup or apply
> the sound patch? Do you have
> $_sound=(on) ?
It also crashes on 1.1.3. I don't remember exactly what went wrong with
1.0.2.1 since it was a while ago.
If I disable sound I get pretty much the same result, see below.
/Johan Gill, johane@lysator.liu.se
[-- Attachment #2: boot.nosound --]
[-- Type: text/plain, Size: 5123 bytes --]
MFS: dos_fs: build_ufs_path result is '/home/johan/dosemu/msdos/ega_graf.ovl'
MFS: no drive selected fn=23
MFS: Finished dos_fs_redirect
int 0x2f, ax=0x1123
Do INT0x2f: Using caller_function()
INT2F at fdc8:6ab2: AX=1116, BX=6a66, CX=0000, DX=0000, DS=0133, ES=0133
MFS: Entering dos_fs_redirect, FN=16
MFS: selecting drive fn=16 sda_cds=0x5320
MFS: selected drive 2: /home/johan/dosemu/msdos/
MFS: (mode = 0x0000)
MFS: (sft_open_mode = 0x0000)
MFS: Open existing file C:\SIERRA\SQ2\EGA_GRAF.OVL
MFS: dos_fs: build_ufs_path for DOS path 'C:\SIERRA\SQ2\EGA_GRAF.OVL'
MFS: MFS: dos_gen: ufs '/home/johan/dosemu/msdos/', path '\SIERRA\SQ2\EGA_GRAF.OVL', l=25
MFS: dos_gen: path_to_ufs '/home/johan/dosemu/msdos//sierra/sq2/ega_graf.ovl'
MFS: dos_fs: build_ufs_path result is '/home/johan/dosemu/msdos/sierra/sq2/ega_graf.ovl'
MFS: find_file(/home/johan/dosemu/msdos/sierra/sq2/ega_graf.ovl)
MFS: find file /home/johan/dosemu/msdos/sierra/sq2/ega_graf.ovl
MFS: scan_dir(/home/johan/dosemu/msdos/sierra/sq2,ega_graf.ovl)
MFS: scan_dir gave ega_graf.ovl FALSE
MFS: find_file(): no match: /home/johan/dosemu/msdos/sierra/sq2/ega_graf.ovl
MFS: find_file gave /home/johan/dosemu/msdos/sierra/sq2/ega_graf.ovl 0
MFS: open failed: '/home/johan/dosemu/msdos/sierra/sq2/ega_graf.ovl'
MFS: Finished dos_fs_redirect
Do INT0x21: Using caller_function()
INT21 (0) at 0861:6807: AX=3fe1, BX=ffff, CX=0250, DX=0000, DS=11e1, ES=1262
int 0x21, ax=0x3fe1
Do INT0x21: Using caller_function()
INT21 (0) at 0861:5d64: AX=3e62, BX=ffff, CX=0250, DX=0000, DS=11e1, ES=1262
int 0x21, ax=0x3e62
Do INT0x21: Using caller_function()
INT21 (0) at 0861:5ce3: AX=3d00, BX=0010, CX=0250, DX=00c5, DS=11d1, ES=1262
INT21: open file "IBM_OBJS.OVL"
int 0x21, ax=0x3d00
Do INT0x2f: Using caller_function()
INT2F at fdc8:ac10: AX=1123, BX=0003, CX=6a66, DX=00c5, DS=11d1, ES=0133
MFS: Entering dos_fs_redirect, FN=23
MFS: selecting drive fn=23 sda_cds=0x1526f
MFS: FNX=IBM_OBJS.OVL
MFS: dos_fs: build_ufs_path for DOS path 'IBM_OBJS.OVL'
MFS: MFS: dos_gen: ufs '/home/johan/dosemu/msdos/', path 'IBM_OBJS.OVL', l=25
MFS: dos_gen: path_to_ufs '/home/johan/dosemu/msdos/ibm_objs.ovl'
MFS: dos_fs: build_ufs_path result is '/home/johan/dosemu/msdos/ibm_objs.ovl'
MFS: no drive selected fn=23
MFS: Finished dos_fs_redirect
int 0x2f, ax=0x1123
Do INT0x2f: Using caller_function()
INT2F at fdc8:6ab2: AX=1116, BX=6a66, CX=0000, DX=0000, DS=0133, ES=0133
MFS: Entering dos_fs_redirect, FN=16
MFS: selecting drive fn=16 sda_cds=0x5320
MFS: selected drive 2: /home/johan/dosemu/msdos/
MFS: (mode = 0x0000)
MFS: (sft_open_mode = 0x0000)
MFS: Open existing file C:\SIERRA\SQ2\IBM_OBJS.OVL
MFS: dos_fs: build_ufs_path for DOS path 'C:\SIERRA\SQ2\IBM_OBJS.OVL'
MFS: MFS: dos_gen: ufs '/home/johan/dosemu/msdos/', path '\SIERRA\SQ2\IBM_OBJS.OVL', l=25
MFS: dos_gen: path_to_ufs '/home/johan/dosemu/msdos//sierra/sq2/ibm_objs.ovl'
MFS: dos_fs: build_ufs_path result is '/home/johan/dosemu/msdos/sierra/sq2/ibm_objs.ovl'
MFS: find_file(/home/johan/dosemu/msdos/sierra/sq2/ibm_objs.ovl)
MFS: find file /home/johan/dosemu/msdos/sierra/sq2/ibm_objs.ovl
MFS: scan_dir(/home/johan/dosemu/msdos/sierra/sq2,ibm_objs.ovl)
MFS: scan_dir gave ibm_objs.ovl FALSE
MFS: find_file(): no match: /home/johan/dosemu/msdos/sierra/sq2/ibm_objs.ovl
MFS: find_file gave /home/johan/dosemu/msdos/sierra/sq2/ibm_objs.ovl 0
MFS: open failed: '/home/johan/dosemu/msdos/sierra/sq2/ibm_objs.ovl'
MFS: Finished dos_fs_redirect
Do INT0x21: Using caller_function()
INT21 (0) at 0861:6807: AX=3f3c, BX=ffff, CX=0160, DX=0000, DS=123c, ES=1262
int 0x21, ax=0x3f3c
Do INT0x21: Using caller_function()
INT21 (0) at 0861:5d64: AX=3e62, BX=ffff, CX=0160, DX=0000, DS=123c, ES=1262
int 0x21, ax=0x3e62
Doing REP insb(0) 1 bytes at 0x18f22, DF 0
DMA: Read 0 from Channel 0 Address (Byte 0)
Doing REP insb(0) 1 bytes at 0x18f23, DF 0
DMA: Read 0 from Channel 0 Address (Byte 1)
Doing REP insb(0x200) 1 bytes at 0x18f28, DF 0
PORTb: 200 not available for read
200 > ff
SIGILL while in vm86()
ERROR: unexpected CPU exception 0x06 err=0x00000000 cr2=00000000 while in vm86 (DOS)
ERROR: unexpected CPU exception 0x06 err=0x00000000 cr2=00000000 while in vm86 (DOS)
Program=sigsegv.c, Line=193
EIP: 0861:0000988d ESP: 1262:73735afb VFLAGS(b): 00000 00110010 10000010
EAX: 000040f8 EBX: 0000ffff ECX: 0000b900 EDX: 00000200 VFLAGS(h): 00003282
ESI: 00000008 EDI: 00006909 EBP: 00002868 DS: 1262 ES: 1262 FS: 0000 GS: 0000
FLAGS: SF IF RF VM VIF IOPL: 3
STACK: 00 00 00 00 00 00 00 00 00 00 -> 08 69 08 00 68 28 0b 5b ff ff
OPS : 38 6c c6 fe c6 00 18 0c 38 6c -> c6 fe c6 00 7e 81 9d a1 a1 9d
c6fec6 0861:988d mov dh,0xc6
Program=sigsegv.c, Line=200
EIP: 0861:0000988d ESP: 1262:73735afb VFLAGS(b): 00000 00110010 10000010
EAX: 000040f8 EBX: 0000ffff ECX: 0000b900 EDX: 00000200 VFLAGS(h): 00003282
ESI: 00000008 EDI: 00006909 EBP: 00002868 DS: 1262 ES: 1262 FS: 0000 GS: 0000
FLAGS: SF IF RF VM VIF IOPL: 3
STACK: 00 00 00 00 00 00 00 00 00 00 -> 08 69 08 00 68 28 0b 5b ff ff
OPS : 38 6c c6 fe c6 00 18 0c 38 6c -> c6 fe c6 00 7e 81 9d a1 a1 9d
c6fec6 0861:988d mov dh,0xc6
next prev parent reply other threads:[~2002-06-12 21:56 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-06-12 18:01 What's up with Space Quest 2? Stas Sergeev
2002-06-12 21:56 ` Johan Gill [this message]
2002-06-12 22:03 ` Hartmut Figge
-- strict thread matches above, loose matches on Subject: below --
2002-06-13 1:04 Stas Sergeev
2002-06-13 10:26 ` Johan Gill
2002-06-13 10:58 ` Johan Gill
2002-06-13 11:03 ` Bart Oldeman
2002-06-13 11:00 ` Bart Oldeman
2002-06-12 16:40 Johan Gill
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D07C389.7080809@lysator.liu.se \
--to=johane@lysator.liu.se \
--cc=linux-msdos@vger.kernel.org \
--cc=stas.orel@mailcity.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox