From mboxrd@z Thu Jan 1 00:00:00 1970 From: Boszormenyi Zoltan Subject: Freshly installed dos-6.22 with disk image does not work Date: Thu, 28 Nov 2002 17:00:43 +0100 Sender: linux-msdos-owner@vger.kernel.org Message-ID: <3DE63DAB.3070402@freemail.hu> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="------------060207010600090406050102" Return-path: List-Id: To: linux-msdos@vger.kernel.org This is a multi-part message in MIME format. --------------060207010600090406050102 Content-Type: text/plain; charset="iso-8859-2"; format="flowed" Content-Transfer-Encoding: quoted-printable Hi, I wanted to play some old games on my new RH8.0 (all upgrades are applied), and I compiled dosemu-1.1.3.7 with the attached compile-time settings. I also installed the freedos package but for some reason the games I=20 wanted to try does not start. So I decided to install MS-DOS 6.22 into a disk-image so I used "mkfatimage16 -k 262144 >dosdisk.bin" to create the image and with "xdosemu -A" I was able to install the 3 floppies. After that I changed $_hdimage: $_hdimage =3D "dosdisk.bin" so it uses the image as a virtual disk instead of the "freedos"=20 directory as a network drive. xdosemu now refuses to work. The boot.log attached. I copied the vga.pcf=20 font to the proper place but did not bother to restart the font server yet. What's wrong with my installation? When I change $_hdimage to $_hdimage =3D "freedos dosdisk.bin" then xdosemu loads freedos but listing D: seems to not contain the=20 D:\DOS directory and io.sys and msdos.sys both seem to be 0 bytes long. On another machine, with a RH 7.3, I also installed dosemu-1.1.3.7=20 (1.0.2 segfaults) and it works there on a real win98 partition. I kept the old dosemu.conf=20 et.al from a previous RH 6.2 / dosemu-1.0.2 installation there. I recompiled dosemu without experimental stuff to see what happens but=20 no change. BTW, the mkfatimage* executables, the setup-dosemu script, midid, etc=20 should also be installed somewhere (under /opt/dosemu/bin ?) when I do a=20 "./install_systemwide". Best regards, Zolt=E1n B=F6sz=F6rm=E9nyi --------------060207010600090406050102 Content-Type: text/plain; name="compiletime-settings" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="compiletime-settings" config { experimental on sbemu on mitshm on x on net on dodebug off slangforce off runasroot on linkstatic off cpuemu off aspi on svgalib off pthreads off } --------------060207010600090406050102 Content-Type: text/plain; name="boot.log" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="boot.log" Running unpriviledged in low feature mode Linux kernel 2.4.18; CPU speed is 501110000 Hz Dosemu-1.1.3.7 Running on CPU=586, FPU=1 using stderr for debug-output debug flags: -a+cw CONF: Disabling use of pentium timer CONF: dosbanner on CONF: timint on CONF: CPU set to 386 CONF: 8192k bytes XMS memory CONF: 8192k bytes EMS memory CONF: EMS-frame = 0xe000 CONF: dosemu running on SER: /dev/ttyS0 port 0 int 0 SER: /dev/ttyS1 port 0 int 0 CONF: Keyboard-layout keyb-user CONF: Keyboard-layout auto device: /dev/fd0 type 2 h: 0 s: 0 t: 0 floppy A: CONF: DPMI-Server on CONF: not allowing speaker port access CONF: IPX support off CONF(LPT0) f: (null) c: lpr o: -Plp %s t: 20 port: 378 device: /home/zozo/dosemu/dosdisk.bin type 0 header_size: 128 h: -1 s: -1 t: -1 drive C: CONF: config variable c_system unset CONF: not enough privilege to define config variable c_user CONF: mostly running as ROOT: uid=500 (cached 500) gid=500 (cached 500) DBG_FD already set DOSEMU-1.1.3.7 is coming up on Linux version 2.4.18-17.8.0smp CONF: reserving 640Kb at 0x00000 for 'd' (Base DOS memory (first 640K)) CONF: reserving 64Kb at 0xF0000 for 'r' (Dosemu reserved area) major = 136 minor = 2 ERROR: X: Unable to open font "vga"ERROR: X: Unable to open font "vga"ERROR: , trying "vga"... ERROR: , trying "vga"... ERROR: X: Unable to open font "vga"ERROR: X: Unable to open font "vga"ERROR: , trying "9x15"... ERROR: , trying "9x15"... CONF: reserving 128Kb at 0xA0000 for 'v' (Video memory) SERIAL $Header: /usr/src/dosemu0.60/serial/RCS/ser_init.c,v 1.1 1995/05/06 16:26:19 root Exp root $ CONF: reserving 64Kb at 0xE0000 for 'E' (EMS page frame) TIME: using 9154 usec for updating ALRM timer SIGILL while in vm86() ERROR: LOCK prefix not permitted! SIGILL while in vm86() ERROR: LOCK prefix not permitted! SIGILL while in vm86() ERROR: LOCK prefix not permitted! SIGILL while in vm86() ERROR: LOCK prefix not permitted! SIGILL while in vm86() ERROR: LOCK prefix not permitted! SIGILL while in vm86() ERROR: LOCK prefix not permitted! SIGILL while in vm86() ERROR: LOCK prefix not permitted! SIGILL while in vm86() ERROR: LOCK prefix not permitted! SIGILL while in vm86() ERROR: LOCK prefix not permitted! SIGILL while in vm86() ERROR: LOCK prefix not permitted! ERROR: general protection at 0x700: 86 ERROR: general protection at 0x700: 86 Program=do_vm86.c, Line=352 EIP: 0070:00010000 ESP: 0000:00007d86 VFLAGS(b): 00000 00000000 10000010 EAX: 00000000 EBX: 00000500 ECX: 00005416 EDX: 0000ed57 VFLAGS(h): 00000082 ESI: 0000f3fb EDI: 000075ff EBP: 0000ed57 DS: 0000 ES: 75d5 FS: 0000 GS: 0000 FLAGS: SF RF VM IOPL: 0 STACK: 7c f8 c3 f9 c3 b4 02 8b d5 75 -> 01 02 00 00 d5 75 01 02 00 00 OPS : 40 7c 00 00 86 00 40 7c 00 00 -> 86 00 40 7c 00 00 86 00 40 7c 8600 0070:0000 xchg al,[bx+si] 00| f000:0000->0f0000 01| f000:0010->0f0010 02| f000:0020->0f0020 03| f000:0030->0f0030 04| f000:0040->0f0040 05| f000:0050->0f0050 06| f000:0060->0f0060 07| f000:0070->0f0070 08| f800:4000->0fc000 09| f000:e987->0fe987 0a| f000:00a0->0f00a0 0b| f000:00b0->0f00b0 0c| f000:00c0->0f00c0 0d| f000:00d0->0f00d0 0e| f000:00e0->0f00e0 0f| f000:00f0->0f00f0 10| f000:0100->0f0100 11| f000:0110->0f0110 12| f000:0120->0f0120 13| f000:0130->0f0130 14| f000:0140->0f0140 15| f000:0150->0f0150 16| f800:3500->0fb500 17| f000:0170->0f0170 18| f000:0180->0f0180 19| f000:0190->0f0190 1a| f000:01a0->0f01a0 1b| f000:01b0->0f01b0 1c| 7c40:01c0->07c5c0 1d| 0086:0000->000860 1e| 0000:7c40->007c40 1f| 7c40:0086->07c486 20| 0086:0000->000860 21| 0000:7c40->007c40 22| 7c40:0086->07c486 23| 0086:0000->000860 24| 0000:7c40->007c40 25| 7c40:0086->07c486 26| 0086:0000->000860 27| 0000:7c40->007c40 28| 7c40:0086->07c486 29| 0086:0000->000860 2a| 0000:7c40->007c40 2b| 7c40:0086->07c486 2c| 0086:0000->000860 2d| 0000:7c40->007c40 2e| 7c40:0086->07c486 2f| 0086:0000->000860 30| 0000:7c40->007c40 31| 7c40:0086->07c486 32| 0086:0000->000860 33| 0000:7c40->007c40 34| 7c40:0086->07c486 35| 0086:0000->000860 leavedos(4|0x4) called - shutting down calling SIG_close calling keyboard_close 00| f000:0000->0f0000 01| f000:0010->0f0010 02| f000:0020->0f0020 03| f000:0030->0f0030 04| f000:0040->0f0040 05| f000:0050->0f0050 06| f000:0060->0f0060 07| f000:0070->0f0070 08| f800:4000->0fc000 09| f000:e987->0fe987 0a| f000:00a0->0f00a0 0b| f000:00b0->0f00b0 0c| f000:00c0->0f00c0 0d| f000:00d0->0f00d0 0e| f000:00e0->0f00e0 0f| f000:00f0->0f00f0 10| f000:0100->0f0100 11| f000:0110->0f0110 12| f000:0120->0f0120 13| f000:0130->0f0130 14| f000:0140->0f0140 15| f000:0150->0f0150 16| f800:3500->0fb500 17| f000:0170->0f0170 18| f000:0180->0f0180 19| f000:0190->0f0190 1a| f000:01a0->0f01a0 1b| f000:01b0->0f01b0 1c| 7c40:01c0->07c5c0 1d| 0086:0000->000860 1e| 0000:7c40->007c40 1f| 7c40:0086->07c486 20| 0086:0000->000860 21| 0000:7c40->007c40 22| 7c40:0086->07c486 23| 0086:0000->000860 24| 0000:7c40->007c40 25| 7c40:0086->07c486 26| 0086:0000->000860 27| 0000:7c40->007c40 28| 7c40:0086->07c486 29| 0086:0000->000860 2a| 0000:7c40->007c40 2b| 7c40:0086->07c486 2c| 0086:0000->000860 2d| 0000:7c40->007c40 2e| 7c40:0086->07c486 2f| 0086:0000->000860 30| 0000:7c40->007c40 31| 7c40:0086->07c486 32| 0086:0000->000860 33| 0000:7c40->007c40 34| 7c40:0086->07c486 35| 0086:0000->000860 calling disk_close_all calling video_close releasing ports and blocked devices calling shared memory exit calling HMA exit closing debugger pipes calling mapping_close() calling close_all_printers calling mouse_close --------------060207010600090406050102 Content-Type: text/plain; name="dosemu.conf" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dosemu.conf" ############################################################################## # This file is /etc/dosemu.conf, included by /global.conf # # Linux DOSEMU configuration for parser versions >= 3 (dosemu-0.97.0.1) # # ./doc/README.txt (chapter 2.) contains a description of the syntax # and the usage of dosemu.conf. # # # Access rights are defined in # # /etc/dosemu.users # ############################################################################## # Notes for editing this section: # # In $_xxx = (n) n is a numerical or boolean value # = = # In $_zzz = "s" s is a string # # Please edit only between the brackets and quotes and keep the rest intact. # ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^ $_debug = "-a+cw" # same format as -D commandline option # (but without the -D in front) $_features= "" # list of temporary hacks, see release notes in # the file ChangeLog. e.g "0:1 2:0", which means # to set feature_0 to 1 and feature_2 to 0. $_mapping= "" # preferred mapping driver, one of: # auto, mapself, mapfile, mapshm $_timint = (on) # emulate INT08 type timer interrupts $_mathco = (on) # or off $_cpu = "80386" # CPU shown to DOS, valid values: "80[345]86" # or "emulated" for non-native CPU (386 in this case) $_rdtsc = (off) # if possible use Pentium cycle counter $_cpuspeed = (0) # 0 = calibrated by dosemu, else given (e.g.166.666) $_pci = (off) $_xms = (8192) # in Kbyte $_ems = (8192) # in Kbyte $_ems_frame = (0xe000) $_dpmi = (8192) # in Kbyte $_dosmem = (640) # in Kbyte, < 640 $_hardware_ram = "" # list of segment values/ranges such as # "0xc8000 range 0xcc000,0xcffff" $_secure ="ngd" # secure for: n (normal users), g (guest), d (dexe) # empty string: depending on 'restricted' # "0": always insecure (not recommended) $_odd_hosts = "" # black list such as "lucifer.hell.com billy.the.cat" $_diskless_hosts="" # black list such as "hacker1 newbee gateway1" $_emusys = "" # empty or 3 char., config.sys -> config.XXX $_emuini = "" # empty or 3 char., system.ini -> system.XXX $_hogthreshold = (1) # 0 == all CPU power to DOSEMU $_irqpassing = "" # list of IRQ numbers (2-15) to pass to DOS such as # "3 8 10" $_speaker = "" # or "native" or "emulated" $_term_char_set = "" # Global code page and character set selection. # "" == automatic, else: ibm, latin, latin1, latin2, # koi8r # Character set used externally to dosemu $_external_char_set = "" # "" == use $_term_char_set one of else: # "cp437", "cp737", "cp775", "cp850", "cp852", "cp857", # "cp860", "cp861", "cp862", "cp863", "cp864", "cp865", # "cp866", "cp869", "cp874", # "iso8859-1", "iso8859-2", "iso8859-3", "iso8859-4", # "iso8859-5", "iso8859-6", "iso8859-7", "iso8859-8", # "iso8859_9", "iso8859-14", "iso8859-15", "koi8-r" # Character set used by dos programs $_internal_char_set = "" # "" == use $_term_char_set one of else: # "cp437", "cp737", "cp775", "cp850", "cp852", "cp857", # "cp860", "cp861", "cp862", "cp863", "cp864", "cp865", # "cp866", "cp869", "cp874" $_term_color = (on) # terminal with color support $_term_updfreq = (1) # time between refreshes (units: 20 == 1 second) $_escchar = (30) # 30 == Ctrl-^, special-sequence prefix $_rawkeyboard = (0) # bypass normal keyboard input, maybe dangerous $_layout = "auto" # one of: finnish(-latin1), de(-latin1), be, it, us # uk, dk(-latin1), keyb-no, no-latin1, dvorak, po # sg(-latin1), fr(-latin1), sf(-latin1), es(-latin1) # sw, hu(-latin2), hu-cwi, keyb-user # hr-cp852, hr-latin2, cz-qwerty, cz-qwertz, ru, tr. # Or 'auto' (which tries to generate the table from # the current Linux console settings) $_keybint = (on) # emulate PCish keyboard interrupt $_toggle = "" # toggle alternate layout, one of "shift_shift", # "ctrl_shift", "alt_shift". "" == disable toggling $_X_updfreq = (1) # time between refreshes (units: 20 == 1 second) $_X_title = "DOS in a BOX" # Title in the top bar of the window $_X_icon_name = "xdos" # Text for icon, when minimized $_X_keycode = (auto) # on == translate keyboard via dosemu keytables # or 'off' or 'auto' $_X_blinkrate = (12) # blink rate for the cursor $_X_font = "" # basename from /usr/X11R6/lib/X11/fonts/misc/* # (without extension) e.g. "vga" $_X_mitshm = (on) # Use shared memory extensions $_X_sharecmap = (off) # share the colormap with other applications $_X_fixed_aspect = (on) # Set fixed aspect for resizing the graphics window $_X_aspect_43 = (on) # Always use an aspect ratio of 4:3 for graphics $_X_lin_filt = (off) # Use linear filtering for >15 bpp interpolation $_X_bilin_filt = (off) # Use bi-linear filtering for >15 bpp interpolation $_X_mode13fact = (2) # initial size factor for video mode 0x13 (320x200) $_X_winsize = "" # "x,y" of initial windows size (defaults to float) $_X_gamma = (1.0) # gamma correction $_X_vgaemu_memsize = (1024) # size (in Kbytes) of the frame buffer for emulated vga $_X_lfb = (on) # use linear frame buffer in VESA modes $_X_pm_interface = (on) # use protected mode interface for VESA modes $_X_mgrab_key = "Home" # KeySym name to activate mouse grab, empty == off $_X_vesamode = "" # "xres,yres ... xres,yres" # List of vesamodes to add. The list has to contain # SPACE separated "xres,yres" pairs $_video = "vga" # one of: plainvga, vga, ega, mda, mga, cga $_console = (0) # use 'console' video $_graphics = (0) # use the cards BIOS to set graphics $_videoportaccess = (1) # allow videoportaccess when 'graphics' enabled $_vbios_seg = (0) # set the address of your VBIOS (e.g. 0xc000, 0xe000) $_vbios_size = (0) # set the size of your BIOS (e.g. 0x10000, 0x8000). # 0 for $_vbios_seg/$_vbios_size means autodetection # (NOTE: DOSEMU must run in full feature mode for this) $_vmemsize = (1024) # size of regen buffer $_chipset = "" # one of: plainvga, trident, et4000, diamond, avance # cirrus, matrox, wdvga, paradise, ati, s3, sis $_dualmon = (0) # if you have one vga _plus_ one hgc (2 monitors) $_vbootfloppy = "" # if you want to boot from a virtual floppy: # file name of the floppy image under DOSEMU_LIB_DIR # e.g. "floppyimage" disables $_hdimage # "floppyimage +hd" does _not_ disable $_hdimage $_floppy_a ="threeinch" # or "fiveinch" or "atapi" or empty, if non-existant # optionally the device may be appended such as # "threeinch:/dev/fd0" $_floppy_b = "" # ditto for B: #$_hdimage = "freedos" $_hdimage = "dosdisk.bin" # list of hdimages under DOSEMU_LIB_DIR # assigned in this order such as # "hdimage_c hdimage_d hdimage_e" # If the name begins with '/dev/', then partion # access is done instead of virtual hdimage such as # "/dev/hda1" or "/dev/hda1:ro" for readonly # Currently mounted devices and swap are refused. # Hdimages and devices may be mixed such as # "hdimage_c /dev/hda1 /dev/hda3:ro" # Note: 'wholedisk' is _not_ supported. $_hdimage_r = $_hdimage # hdimages for 'restricted access (if different) $_aspi = "" # list of generic SCSI devices to make available # for the builtin aspi driver (format of an entry # is 'device:type:mappedtarget' such as # "sg2:WORM sg3:Sequential-Access:6 sg4:CD-ROM" or # "sg2:4 sg3:1:6 sg4:5" (which are equal) $_com1 = "/dev/ttyS0" # e.g. "/dev/mouse" or "/dev/ttyS0" $_com2 = "/dev/ttyS1" # e.g. "/dev/modem" or "/dev/ttyS1" $_com3 = "" # ditto "/dev/ttyS2" $_com4 = "" # ditto "/dev/ttyS3" # Note: all "/dev/ttyXX" may be suffixed by the IRQ # used (instead of the default one), such as # "/dev/ttyS2 irq 5" or "/dev/ttyS3 irq 9" $_ttylocks = "" # Lock directory (e.g. "/var/lock") # default ("") is /usr/spool/uucp $_mouse = "" # one of: microsoft, mousesystems, logitech, mmseries # mouseman, hitachi, busmouse, ps2, imps2 $_mouse_dev = "" # one of: com1, com2, com3, com4 or /dev/mouse $_mouse_flags = "" # empty list or one or more of: # "emulate3buttons cleardtr" $_mouse_baud = (0) # baudrate, 0 == don't set $_printer = "lp" # list of (/etc/printcap) printer names to appear as # LPT1, LPT2, LPT3 (not all are needed, empty for none) $_printer_timeout = (20)# idle time in seconds before spooling out $_ports = "" # list of portnumbers such as "0x1ce 0x1cf 0x238" # or "0x1ce range 0x280,0x29f 310" # or "range 0x1a0,(0x1a0+15)" $_ipxsupport = (off) # or on $_novell_hack = (off) $_pktdriver = (off) # 'on' for Packet Driver $_netdev = "eth0" # network device for Packet Driver $_vnet = (off) # 'on' for packet-multi # (used by dosnet, dsn0 overrides $_netdev) $_sound = (on) # sound support on/off $_sb_base = (0x220) $_sb_irq = (5) $_sb_dma = (1) $_sb_dsp = "/dev/dsp" $_sb_mixer = "" # or "/dev/mixer" if you allow that dosemu # changes the volume $_mpu_base = "0x330" $_joy_device = "" # 1st and 2nd joystick device # ("" if you don't want an emulated joystick) # e.g. "/dev/js0" or "/dev/js0 /dev/js1" # $_joy_dos_min = (1) # range for joystick axis readings, must be > 0 $_joy_dos_max = (150) # avoid setting this to > 250 $_joy_granularity = (1) # the higher, the less sensitive - # useful if you have a wobbly joystick --------------060207010600090406050102--