From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stas Sergeev Subject: Re: Terminal Video Problem Solved (and sound too!) Date: Mon, 02 Dec 2002 13:42:55 +0300 Sender: linux-msdos-owner@vger.kernel.org Message-ID: <3DEB392F.4050504@yahoo.com> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: List-Id: Content-Type: text/plain; charset="us-ascii"; format="flowed" To: linux-msdos@vger.kernel.org Hello. Mushroom wrote: >> OK, try the attached patch. > That's fixed it!!! Great! Hmm, that was just too easy, there is still something fishy about that. Do you have $_pci option disabled or enabled? If it is enabled, could you try to undo the patch, set $_pci=(off) and reproduce the problem? Oh, please, do that carefully this time:) The suggested way would be to just erase and re-install the entire 1.1.3 sources with 1.1.3.7 patchset (1.1.3.7 patchset is an essential part here, as 1.1.3.0 have its own problems with some video boards). You may also use a default dosemu.conf as $_pci is disabled there. That way the chances of any mistake are minimized. I want to be certain that it is not a $_pci option guilty for your problems at a first place. > The graphic card details no longer come up when dosemu starts Yes, it was printed by the POST routines, which are now bypassed. > The console is left in video mode Could you elaborate on that? This happens only when you terminate dosemu while in graphics mode, right? How exactly are you terinating it? I've never seen such a strange behaveour here with my Radeon unless I was playing with VESA (which is disabled for most dosemu users including you).