DOSEMU SPX PDETHER SOLVED!!!!

[Peter Eckhardt <peter@dadi-linux.de>]

Hi,

i just respond to my own mail. But as I didn't find documentation
how to make the above work in current dosemus i will summarize
how to get SPX working

1. Create a dosemu image which uses msdos or drdos (i used drdos)
    I did it as follows
      cd <DOSEMU_LIBDIR>
      mkfat_image16 -k 32768 -p > drdos.img

      in your .dosemurc change
      $_hdimage to read
      $_hdimage="<DOSEMU_LIBDIR/freedos.img <DOSEMU_LIBDIR>/drdos.img"


      if you are on it also set
      $_ipx_support=(off)
      $_pktdriver=(on)
      $_novell_hack=(on)
      $_netdev="tap0"
      $_vnet="tap"


      start dosemu (your drdos image should now be on D:)
      in dosemu do format D: (that didn't work when run from the drdos
      install, don't know why)

      in your .dsoemurc change
      $_hdimage to $_hdimage="<DOSEMU_LIBDIR/drdos.img"

      Create drdos floppies and run

      dosemu -A with the first disk in floppy A (usually /dev/fd0)
      install drdos

      Copy the dosemu gnu and help directories from your old 
installation          	to the drdos image. You can use the same scanrio 
as above.

      Create a tmp directory in C:

      Edit your config.sys and autoexec.bat

      - config.sys

      SWITCHES=/F
      DOS=UMB,HIGH
      dosdata=umb
      DEVICEHIGH=C:\dosemu\ems.sys
      DEVICEHIGH=C:\DRDOS\SETVER.EXE
      SHELLHIGH=C:\COMMAND.COM C:\ /E:1024 /P
      BREAK=OFF
      BUFFERS=15
      FILES=40
      FCBS=4,4
      LASTDRIVE=Z
      HISTORY=ON,512,ON
      COUNTRY=1,,C:\DRDOS\COUNTRY.SYS


      - autoexec.bat-

      @ECHO Off
      PATH C:\DRDOS;C:\;c:\gnu;C:\dosemu
      set HELPPATH=C:\help
      set TEMP=C:\tmp
      PROMPT [DR-DOS] $P$G
      unix -s DOSDRIVE_D
      if "%DOSDRIVE_D% == "" goto nodrived
      lredir d: linux\fs%DOSDRIVE_D%
      :nodrived
      unix -s DOSEMU_VERSION
      SET DRDOSCFG=C:\DRDOS
      NWCACHE 512 256 /LEND=ON /DELAY=OFF
      unix -e


2. Get the nwclient discs from novell and install them into C:\nwclient
    Get pdether-1.03
    Check that you have tun/tap installed in your linux. If not simply 
            get the sources and install.
    Put the following line in /etc/modules.conf
       alias char-major-10-200 tun

    Make sure /dev/net/tun is accessible by the user who runs dosemu. On 
     my client box i did a chmod a+rwx /dev/net/tun /dev/tap* (DANGER!!!!)

    Create a startnet.bat and net.cfg in dosemu

    CD C:\NWCLIENT
    edit ....

    - startnet.bat -

    SET NWLANGUAGE=DEUTSCH
    LH C:\NWCLIENT\LSL /c=C:\NWCLIENT\net.cfg
    C:\NWCLIENT\PDETHER.EXE
    LH C:\NWCLIENT\IPXODI.COM
    rem LH C:\NWCLIENT\NETX
    LH C:\NWCLIENT\VLM.EXE


    - net.cfg -

    Link Support
           Buffers 4 1514
           MemPool 2048

    Link Driver PDETHER
           Int 60
           FRAME Ethernet_II
           USE DEFAULTS=OFF
           VLM=CONN.VLM
           VLM=IPXNCP.VLM
           VLM=TRAN.VLM
           VLM=SECURITY.VLM
           VLM=NDS.VLM
           VLM=NWP.VLM
           VLM=FIO.VLM
           VLM=BIND.VLM
           VLM=PRINT.VLM
           VLM=GENERAL.VLM
           VLM=REDIR.VLM
           VLM=NETX.VLM

    NetWare DOS Requester
           FIRST NETWORK DRIVE   = F
           NETWORK PROTOCOL      = BIND
           SHOW DOTS             = ON
           SET STATION TIME      = ON
           PREFERRED SERVER      = EMK1
           FILE HANDLES          = 40
           LOCAL PRINTERS        = 1
           VLM                   = AUTO.VLM


  Now fire up startnet.bat and things should run ....


Hope that helps

Peter




-- 

dadi-linux                       www.dadi-linux.de

Peter Eckhardt                   Fon: +49 6071 951256
Weberstr. 36B                    Fax: +49 6071 951257
64846 Groß-Zimmern               peter.eckhardt@dadi-linux.de

-
To unsubscribe from this list: send the line "unsubscribe linux-msdos" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html