From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stas Sergeev Subject: [Fwd: MIDI input with dosemu : Yes!] Date: Sat, 17 Jan 2004 15:47:47 +0300 Sender: linux-msdos-owner@vger.kernel.org Message-ID: <40092EF3.6070404@aknet.ru> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: List-Id: Content-Type: text/plain; charset="us-ascii"; format="flowed" To: linux-msdos@vger.kernel.org Another FWD on the same subject. Perhaps something to add to sound-usage.txt -------- Original Message -------- Subject: MIDI input with dosemu : Yes! Date: Fri, 16 Jan 2004 16:48:35 -0500 From: Dave Phillips To: Stas Sergeev CC: steve.home@cox.net, ametts@mindspring.com References: <20040116062115.BYPV11223.fed1mtao06.cox.net@smtp.west.cox.net> <4008201E.1080709@aknet.ru> Greetings: Okay, I figured out how to do this. Here's how I did it : 1. Downloaded CVS dosemu. 2. Applied Stas's patch and compiled 3. Linked ALSA virmidi (/dev/snd/C1D0 on my system) to ~/.dosemu/run/dosemu-midi 4. Linked my SBLive MIDI port (/dev/midi00) to ~/.dosemu/run/dosemu-midi_in 5. Connect virmidi port to synth (EMU10k1, TiMidity, whatever) via kaconnect or ALSA MIDI patch bay 6. Start dosemu 7. Install vapimpu.com without IRQ flag 8. Start Seq+, set MIDI Thru to On 9. Enjoy ! Very cool. Btw, dosemu now loads version 1.51 of the vapimpu driver. Also, I can run dosemu full-screen in X. The font aliasing gets pretty severe at high-res, but it's still cool. So there you have it. Stas, thanks a lot: I'll continue tests and will let you know how I fare. Steve, Allan: You can now have a fully operational Seq+, so have at it. :) Best regards, Dave Phillips