From mboxrd@z Thu Jan 1 00:00:00 1970 From: Paolo Gaggini Subject: Re: CTRL+Fn and ALT+Fn mappings Date: Wed, 03 Oct 2007 13:35:33 +0200 Message-ID: <47037E85.3080305@gseserver.net> References: <4702742C.7060201@gseserver.net> <200710030843.58095.clarencedang@yahoo.com> <47033CCB.7060907@gseserver.net> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Sender: linux-msdos-owner@vger.kernel.org List-Id: Content-Type: text/plain; charset="us-ascii"; format="flowed" To: linux-msdos@vger.kernel.org Already tried, but with no success. I run dosemu not remotely but just in front of the PC using its attached keyboard. The TERM env var is set to "linux" and the keyboard mode is XLATE (ASCII). I've an old PC with redhat9 (not configured by me and I don't know who done) in which the CTRL/ALT combinations works fine; in this PC I can see that the TERM var is "xterm" (even if I don't use X neither on this pc) and the keyboard mode is RAW. In its dosemu.conf $_rawkeyboard is effectively set to 1. Any idea about this differences? However, there is somewhere some written docs about the "lot more to configure"? Thank you anyway Paolo Bart Oldeman ha scritto: > On 10/3/07, Paolo Gaggini wrote: >> Thank you for the answer, but: >> >> 1) the problem affects only the linux console (without X I mean) > > In that case you should be able to use the raw keyboard ($_rawkeyboard = (1) > or the -k switch). > > Unless DOSEMU is run remotely (or even from inside mc), in which case > there is a lot more to configure. > > Bart > - > To unsubscribe from this list: send the line "unsubscribe linux-msdos" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html