Linux MS DOS discussions
 help / color / mirror / Atom feed
From: Ivan Baldo <ibaldo@adinet.com.uy>
To: Andrew Joakimsen <joakimsen@gmail.com>
Cc: linux-msdos@vger.kernel.org
Subject: Re: Quick Networking Support Question.
Date: Mon, 22 Sep 2008 16:13:23 -0300	[thread overview]
Message-ID: <48D7EE53.8020902@adinet.com.uy> (raw)
In-Reply-To: <23fd749a0809221152u6ed2d0f9u6b116d51e1fe5d12@mail.gmail.com>

    I think it is called PDETHER, you should find it on the net, never 
tried it though...
    Hope this helps, goodbye.


El 22/09/08 15:52, Andrew Joakimsen escribió:
> Is it or is it not possible? WHICH packet driver is the question I am
> trying to figure out! Theres no such thing as a standard or generic
> network card. So if dosemu support networking it has to emulate some
> LAN adapter. Obviously this has to do with the "packet driver" but I
> have not figured out or seen anywhere WHICH PRECISE "packet driver" to
> be using. There should be an oeminfo.inf file and some .SYS file....
> That should get me on the network.
>
>
> ---------- Forwarded message ----------
> From: Stu <stu.axon@gmail.com>
> Date: 2008/9/22
> Subject: Re: Quick Networking Support Question.
> To: Andrew Joakimsen <joakimsen@gmail.com>
>
>
> Not low level enough support for what you want to do, but i think
> somebody was working on someth linking it with samba or someth.
> Otherwise its possible to use the netware style networking in dosemu
> using the packet driver, ftp and even web with arachne may be possible
>
> On 9/22/08, Andrew Joakimsen <joakimsen@gmail.com> wrote:
>   
>> So there is not "network support" in dosemu?
>>
>> On Mon, Sep 22, 2008 at 1:27 PM, Rafał Cygnarowski <rafilists@gmail.com>
>> wrote:
>>     
>>> Dnia sobota, 20 września 2008, Andrew Joakimsen napisał:
>>>
>>>       
>>>> This is very simple: I enable network support in dosemu, which driver
>>>>         
>>>> do I use in the MS Networking Client ( I am running MS-DOS 6.22)?
>>>>         
>>>> I have read the documentation, but it didn"t help me.
>>>>         
>>>> I installed MS-DOS 6.22 under VirtualBox, everything works fine there
>>>>         
>>>> including the network. I copied this over to dosemu and now it says
>>>>         
>>>> the LAN card is not found, so dosemu doesn"t emulate the AMD LAN II
>>>>         
>>>> hardware.... what is the driver to use?
>>>>         
>>> There's no network card in dosemu you could use. There's only one way to
>>> talk to your host network card - through a packet driver, but AFAIK you
>>> won't be able to run MS Client anyway (you'll need some ndis to packet
>>> driver "adapter" which just doesn't exists).
>>>
>>> If you need use dosemu to connect to some windows/samba resource, then
>>> take
>>>
>>> a look at http://pascalek.pers.pl/en/propage/samba4dosemu-introduction.
>>>
>>> Regards,
>>>
>>> --
>>>
>>> Rafał Cygnarowski
>>>
>>> rafilists [at] gmail [dot] com
>>>       
>
> --
> Sent from Google Mail for mobile | mobile.google.com
> N�����r��y���b�X��ǧv�^�)޺{.n�+����{���h�)���w*\x1fjg���\x1e�����ݢj/���z�ޖ��2�ޙ���&�)ߡ�a��\x7f��\x1e�G���h�\x0f�j:+v���w�٥

-- 
Ivan Baldo - ibaldo@adinet.com.uy - http://ibaldo.codigolibre.net/
From Montevideo, Uruguay, at the south of South America.
Freelance programmer and GNU/Linux system administrator, hire me!
Alternatives: ibaldo@codigolibre.net - http://go.to/ibaldo

--
To unsubscribe from this list: send the line "unsubscribe linux-msdos" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2008-09-22 19:13 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-09-20 15:56 Quick Networking Support Question Andrew Joakimsen
     [not found] ` <200809221927.08074.rafilists@gmail.com>
2008-09-22 18:05   ` Andrew Joakimsen
     [not found]     ` <838f4dc10809221131i59e57253u20bab055b67d839b@mail.gmail.com>
2008-09-22 18:52       ` Andrew Joakimsen
2008-09-22 19:13         ` Ivan Baldo [this message]
2008-09-22 19:19         ` Frank Cox
2008-09-22 20:34         ` Alain M.
2008-09-22 20:46           ` Stu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=48D7EE53.8020902@adinet.com.uy \
    --to=ibaldo@adinet.com.uy \
    --cc=joakimsen@gmail.com \
    --cc=linux-msdos@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox