From mboxrd@z Thu Jan  1 00:00:00 1970
From: Malcolm Salisbury <m.salisbury@clear.net.nz>
Subject: Using a dos program that detects a signal on the parrllel port
Date: Sun, 25 Jul 2010 13:09:30 +1200
Message-ID: <4C4B8ECA.3030001@clear.net.nz>
Mime-Version: 1.0
Content-Transfer-Encoding: 7bit
Return-path: <linux-msdos-owner@vger.kernel.org>
Sender: linux-msdos-owner@vger.kernel.org
List-ID: <linux-msdos.vger.kernel.org>
Content-Type: text/plain; charset="us-ascii"; format="flowed"
To: linux-msdos@vger.kernel.org

Hi

I have searched the mailing list for an answer to this and either cand 
find one or am missing something.

I have dosemu 1.4.0 on puppy linux 5 and can run the program SRM from here

http://www.cenobyte.nl/slotracemanager/hoofdframe.html

The problem is that the access to the parallel port is proving too hard 
for me to work out.

I can get it so the SRM software can see the port but it doesn't see the 
trigger of the sensor on the parallel port.

Any help would be appreciated.

Malcolm Salisbury