* Dosemu stsrts only one time in Putty @ 2011-10-09 19:52 Tomasz Skorupa 2011-10-10 2:09 ` Frantisek Hanzlik 0 siblings, 1 reply; 6+ messages in thread From: Tomasz Skorupa @ 2011-10-09 19:52 UTC (permalink / raw) To: linux-msdos Hi All, I new on the list so let me say that You do a great job! As I say in subject i observe strange behavior on Ubuntu Server 8.04 LTS with Dosemu installed. After installation dosemu starts only one time with properly working screen on Putty terminal. I see Dosemu welcome message when I invoke it via dosemu -t command. When I exit to linux and start Dosemu again I see only black background with cursor block in strange position, but program works ok because when I type exitemu I back to linux prompt. Only machine restart let me run Dosemu again. Exit Putty and start new session not work. Software used: Linux Ubuntu server 8.04 LTS Dosemu 1.4.0 from Ubuntu repository installed via aptitude with no tweeks in config files. Putty for Windows version 0.60 Could Yoy give me some direction what I can change to make it working? Regards, Tomasz Skorupa ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Dosemu stsrts only one time in Putty 2011-10-09 19:52 Dosemu stsrts only one time in Putty Tomasz Skorupa @ 2011-10-10 2:09 ` Frantisek Hanzlik 2011-10-10 16:44 ` Tomasz Skorupa 0 siblings, 1 reply; 6+ messages in thread From: Frantisek Hanzlik @ 2011-10-10 2:09 UTC (permalink / raw) To: Tomasz Skorupa; +Cc: linux-msdos Tomasz Skorupa wrote: > Hi All, > I new on the list so let me say that You do a great job! > > As I say in subject i observe strange behavior on Ubuntu Server 8.04 LTS with Dosemu installed. > After installation dosemu starts only one time with properly working screen on Putty terminal. > I see Dosemu welcome message when I invoke it via dosemu -t command. > When I exit to linux and start Dosemu again I see only black background with cursor block in > strange position, but program works ok because when I type exitemu I back to linux prompt. > Only machine restart let me run Dosemu again. Exit Putty and start new session not work. > Software used: > Linux Ubuntu server 8.04 LTS > Dosemu 1.4.0 from Ubuntu repository installed via aptitude with no tweeks in config files. > Putty for Windows version 0.60 > > Could Yoy give me some direction what I can change to make it working? > > Regards, > Tomasz Skorupa You must restart Linux server, or Windows machine? Running dosemu directly from Linux server is fine? What is Your dosemu.conf file? I never met with something of that kind. From my experience, DOS applications often behaves weirdly when setting $_dosmem >640, but this usualy become evident in every session, not only in second+. I mostly access remote dosemu from other Linux box via "ssh -X" and thus I'm using xdosemu, but "dosemu -t" works for me too (just tested on Fedora 15 with dosemu i686 svn.2053 in vm86 mode) - only one thing seems interesting for me: "mode" command shows (in dependence on accessing PC window size) values as: C:\>mode *** PRINTER PORT 1 STATUS *** Port status: [ ] *** PRINTER PORT 2 STATUS *** Port status: [ ] *** PRINTER PORT 3 STATUS *** Port status: [ ] *** VIRTUAL PRINTER PORT 4 INFORMATION *** Free for redirection to serial ports. *** CONSOLE STATUS *** CON codepage support (FreeDOS DISPLAY) not loaded. Screen size: 110 columns, 39 rows, mode 3, font height 16. Switchar is '/'. Numlock is off. Scrolllock is off. Capslock is off. (110 columns and/or 39 rows are non-standard in DOS world, i'm not sure when it cannot break some dos apps). (and second thing, interesting for me, is line "*** VIRTUAL PRINTER ..". Isn't there in FreeDOS some support for virtual printers which is missing in DOSEMU? Printing to more than 3 (virtual) printers is important for me - know somebody about status in FreeDOS and dosemu?) What Your ~/.dosemu/boot.log ? Tried You compare this between first and second session? Eventually with fiddling with $_debug setting in "/etc/dosemu/dosemu.conf". Best, Franta ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Dosemu stsrts only one time in Putty 2011-10-10 2:09 ` Frantisek Hanzlik @ 2011-10-10 16:44 ` Tomasz Skorupa 2011-10-11 13:18 ` Ivan Baldo 0 siblings, 1 reply; 6+ messages in thread From: Tomasz Skorupa @ 2011-10-10 16:44 UTC (permalink / raw) To: Frantisek Hanzlik; +Cc: linux-msdos [-- Attachment #1: Type: text/plain, Size: 3159 bytes --] Hi Frantisek, W dniu 2011-10-10 04:09, Frantisek Hanzlik pisze: > Tomasz Skorupa wrote: >> Hi All, >> I new on the list so let me say that You do a great job! >> >> As I say in subject i observe strange behavior on Ubuntu Server 8.04 LTS with Dosemu installed. >> After installation dosemu starts only one time with properly working screen on Putty terminal. >> I see Dosemu welcome message when I invoke it via dosemu -t command. >> When I exit to linux and start Dosemu again I see only black background with cursor block in >> strange position, but program works ok because when I type exitemu I back to linux prompt. >> Only machine restart let me run Dosemu again. Exit Putty and start new session not work. >> Software used: >> Linux Ubuntu server 8.04 LTS >> Dosemu 1.4.0 from Ubuntu repository installed via aptitude with no tweeks in config files. >> Putty for Windows version 0.60 >> >> Could Yoy give me some direction what I can change to make it working? >> >> Regards, >> Tomasz Skorupa > You must restart Linux server, or Windows machine? I must restart Linux server to make dosemu working again. Restarting Windows machine do nothing as logout from Linux and start new session with Putty. > Running dosemu directly from Linux server is fine? I need check this. > What is Your dosemu.conf file? As I sad in previous post I don't make changes to default creating by install script. > > I never met with something of that kind. From my experience, DOS > applications often behaves weirdly when setting $_dosmem>640, but > this usualy become evident in every session, not only in second+. > I mostly access remote dosemu from other Linux box via "ssh -X" and > thus I'm using xdosemu, but "dosemu -t" works for me too (just tested > on Fedora 15 with dosemu i686 svn.2053 in vm86 mode) - only one thing > seems interesting for me: "mode" command shows (in dependence on > accessing PC window size) values as: > C:\>mode > *** PRINTER PORT 1 STATUS *** > Port status: [ ] > *** PRINTER PORT 2 STATUS *** > Port status: [ ] > *** PRINTER PORT 3 STATUS *** > Port status: [ ] > *** VIRTUAL PRINTER PORT 4 INFORMATION *** > Free for redirection to serial ports. > *** CONSOLE STATUS *** > CON codepage support (FreeDOS DISPLAY) not loaded. > Screen size: 110 columns, 39 rows, mode 3, font height 16. > Switchar is '/'. Numlock is off. Scrolllock is off. Capslock is off. > > (110 columns and/or 39 rows are non-standard in DOS world, i'm not > sure when it cannot break some dos apps). > > (and second thing, interesting for me, is line "*** VIRTUAL PRINTER ..". > Isn't there in FreeDOS some support for virtual printers which is > missing in DOSEMU? Printing to more than 3 (virtual) printers is > important for me - know somebody about status in FreeDOS and dosemu?) I include picture with result of mode command execution. You find there all informations You want > What Your ~/.dosemu/boot.log ? Tried You compare this between first > and second session? Eventually with fiddling with $_debug setting in > "/etc/dosemu/dosemu.conf". > > Best, Franta Because this is a working server I will do that tests tonight. Regards, Tomasz. [-- Attachment #2: dosemu mode command.PNG --] [-- Type: image/png, Size: 55839 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Dosemu stsrts only one time in Putty 2011-10-10 16:44 ` Tomasz Skorupa @ 2011-10-11 13:18 ` Ivan Baldo 2011-10-11 16:00 ` Tomasz Skorupa 0 siblings, 1 reply; 6+ messages in thread From: Ivan Baldo @ 2011-10-11 13:18 UTC (permalink / raw) To: Tomasz Skorupa; +Cc: Frantisek Hanzlik, linux-msdos Hello. Run DOSEmu, then run it once again so that it fails, write "exitemu" and then send the file ~/.dosemu/boot.log please, maybe there is some information. Thanks. El 10/10/11 14:44, Tomasz Skorupa escribió: > Hi Frantisek, > > W dniu 2011-10-10 04:09, Frantisek Hanzlik pisze: >> Tomasz Skorupa wrote: >>> Hi All, >>> I new on the list so let me say that You do a great job! >>> >>> As I say in subject i observe strange behavior on Ubuntu Server 8.04 >>> LTS with Dosemu installed. >>> After installation dosemu starts only one time with properly working >>> screen on Putty terminal. >>> I see Dosemu welcome message when I invoke it via dosemu -t command. >>> When I exit to linux and start Dosemu again I see only black >>> background with cursor block in >>> strange position, but program works ok because when I type exitemu I >>> back to linux prompt. >>> Only machine restart let me run Dosemu again. Exit Putty and start >>> new session not work. >>> Software used: >>> Linux Ubuntu server 8.04 LTS >>> Dosemu 1.4.0 from Ubuntu repository installed via aptitude with no >>> tweeks in config files. >>> Putty for Windows version 0.60 >>> >>> Could Yoy give me some direction what I can change to make it working? >>> >>> Regards, >>> Tomasz Skorupa >> You must restart Linux server, or Windows machine? > > I must restart Linux server to make dosemu working again. Restarting > Windows machine do nothing as logout from Linux and start new session > with Putty. > > >> Running dosemu directly from Linux server is fine? > I need check this. > >> What is Your dosemu.conf file? > As I sad in previous post I don't make changes to default creating by > install script. > >> >> I never met with something of that kind. From my experience, DOS >> applications often behaves weirdly when setting $_dosmem>640, but >> this usualy become evident in every session, not only in second+. >> I mostly access remote dosemu from other Linux box via "ssh -X" and >> thus I'm using xdosemu, but "dosemu -t" works for me too (just tested >> on Fedora 15 with dosemu i686 svn.2053 in vm86 mode) - only one thing >> seems interesting for me: "mode" command shows (in dependence on >> accessing PC window size) values as: >> C:\>mode >> *** PRINTER PORT 1 STATUS *** >> Port status: [ ] >> *** PRINTER PORT 2 STATUS *** >> Port status: [ ] >> *** PRINTER PORT 3 STATUS *** >> Port status: [ ] >> *** VIRTUAL PRINTER PORT 4 INFORMATION *** >> Free for redirection to serial ports. >> *** CONSOLE STATUS *** >> CON codepage support (FreeDOS DISPLAY) not loaded. >> Screen size: 110 columns, 39 rows, mode 3, font height 16. >> Switchar is '/'. Numlock is off. Scrolllock is off. Capslock is off. >> >> (110 columns and/or 39 rows are non-standard in DOS world, i'm not >> sure when it cannot break some dos apps). >> >> (and second thing, interesting for me, is line "*** VIRTUAL PRINTER ..". >> Isn't there in FreeDOS some support for virtual printers which is >> missing in DOSEMU? Printing to more than 3 (virtual) printers is >> important for me - know somebody about status in FreeDOS and dosemu?) > I include picture with result of mode command execution. You find > there all informations You want > >> What Your ~/.dosemu/boot.log ? Tried You compare this between first >> and second session? Eventually with fiddling with $_debug setting in >> "/etc/dosemu/dosemu.conf". >> >> Best, Franta > Because this is a working server I will do that tests tonight. > > Regards, Tomasz. -- Ivan Baldo - ibaldo@adinet.com.uy - http://ibaldo.codigolibre.net/ From Montevideo, Uruguay, at the south of South America. Freelance programmer and GNU/Linux system administrator, hire me! Alternatives: ibaldo@codigolibre.net - http://go.to/ibaldo -- To unsubscribe from this list: send the line "unsubscribe linux-msdos" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Dosemu stsrts only one time in Putty 2011-10-11 13:18 ` Ivan Baldo @ 2011-10-11 16:00 ` Tomasz Skorupa 2011-10-15 2:20 ` Ivan Baldo 0 siblings, 1 reply; 6+ messages in thread From: Tomasz Skorupa @ 2011-10-11 16:00 UTC (permalink / raw) To: Ivan Baldo; +Cc: linux-msdos [-- Attachment #1: Type: text/plain, Size: 536 bytes --] W dniu 2011-10-11 15:18, Ivan Baldo pisze: > Hello. > Run DOSEmu, then run it once again so that it fails, write > "exitemu" and then send the file ~/.dosemu/boot.log please, maybe > there is some information. > Thanks. > Hello Ivan. I include two files. boot.log.fail - this is what You want. diffrences - fcomp result of compare two files boot.log.success when dosemu start ok and boot.log.fail when dosemu starts with black screen. I check that dosemu -dumb command starts everytime properly Regards, Tomasz Skorupa [-- Attachment #2: boot.log.fail --] [-- Type: text/plain, Size: 3436 bytes --] major = 136 minor = 0 CONF: config variable parser_version_3 set CONF: config variable c_system set CONF: Parsing built-in dosemu.conf file. CONF: config variable version_3_style_used set CONF: Parsing built-in global.conf file. CONF: config variable version_3_style_used unset CONF: config variable version_3_style_used set CONF: opened include file /etc/dosemu/dosemu.conf CONF: closed include file /etc/dosemu/dosemu.conf CONF: mapping driver = 'auto' debug flags: -a+cw CONF: Disabling use of pentium timer CONF: dosbanner on CONF: timer freq=18, update=54925 CONF: CPU set to 586 CONF: JIT CPUEMU set to 0 for 586 CONF: 2048k bytes EMS memory CONF: EMS-frame = 0xe400 CONF: DPMI-Server on (0x5000) CONF: DPMI base addr = 0xffffffff CONF: PM DOS API Translator on CONF: No DJGPP NULL deref checks: off CONF: dosemu running on _terminal CONF: time mode = 'bios' SER: directory /var/lock namestub LCK.. binary No MOUSE: no device specified, type 0 using internaldriver: yes, emulate3buttons: no baudrate: 0 CONF: Keyboard-layout keyb-user CONF: **** Warning: floppy /dev/fd0 not accessable, disabled CONF: fastfloppy = 1 CONF: IPX support off CONF(LPT0) f: (null) c: lpr -l t: 20 port: 0 CONF(LPT1) f: (null) c: lpr -l -P lpt2 t: 20 port: 0 CONF: not allowing speaker port access CONF: Packet Driver enabled. device: /home/tskorupa/.dosemu/drives/c type 4 h: -1 s: -1 t: -1 drive C: device: /home/tskorupa/.dosemu/drives/d type 4 h: -1 s: -1 t: -1 drive D: CONF: cdrom MSCD0001 on /dev/cdrom CONF: config variable c_system unset Linux kernel 2.6.24; CPU speed is 2399916000 Hz CPU-EMU speed is 2400 MHz CONF: mostly running as USER: uid=1000 (cached 1000) gid=1000 (cached 1000) DBG_FD already set DOSEMU-1.4.0.0 is coming up on Linux version 2.6.24-25-server #1 SMP Tue Oct 20 07:20:02 UTC 2009 x86_64 Compiled with GCC version 4.1.3 -m64 WARN: vm86plus service not available in your kernel WARN: using CPU emulation for vm86() CONF: reserving 640Kb at 0x00000 for 'd' (Base DOS memory (first 640K)) CONF: reserving 48Kb at 0xF4000 for 'r' (Dosemu reserved area) CONF: reserving 128Kb at 0xA0000 for 'v' (Video memory) CONF: reserving 8256Kb at 0x100000 for 'x' (Extended memory (HMA+XMS)) CONF: reserving 4Kb at 0xC0000 for 'V' (VGAEMU Video BIOS) SERIAL $Id: ser_init.c 1769 2007-05-04 05:59:48Z bartoldeman $ PKT: Cannot allocate TAP device (dynamic): Permission denied CONF: reserving 64Kb at 0xE4000 for 'E' (EMS page frame) CONF: reserving 140Kb at 0xC1000 for 'U' (Upper Memory Block (UMB, XMS 3.0)) TIME: using 9154 usec for updating ALRM timer ======================= ENTER CPU-EMU =============== DOS termination requested leavedos(0|0x0) called - shutting down ======================= LEAVE CPU-EMU =============== Total cpuemu time 410865 us (incl.trace) Total codgen time 41852 us Total linker time 38828 us Total exec time 125488 us (incl.faults) Total insert time 39499 us Total search time 12093 us Total clean time 15893 us Max tree nodes 2280 Max node size 523 Max tree depth 13 Nodes parsed 112049 Find misses 97229 Nodes executed 505442 Find hits 136722 (27%) Find last hits 368720 (72%) Page faults 7919 Signals received 106 Tree cleanups 14 [-- Attachment #3: diffrences --] [-- Type: text/plain, Size: 1345 bytes --] FILE A: boot.log.success FILE B: boot.log.fail TOTALS: 14 inserted 14 deleted 68 matched ******************** REPLACE [A 63-69, B 63-69]: Total cpuemu time 414125 us (incl.trace) Total codgen time 42933 us Total linker time 39106 us Total exec time 125993 us (incl.faults) Total insert time 39932 us Total search time 12321 us Total clean time 15570 us ******************** WITH: Total cpuemu time 410865 us (incl.trace) Total codgen time 41852 us Total linker time 38828 us Total exec time 125488 us (incl.faults) Total insert time 39499 us Total search time 12093 us Total clean time 15893 us ******************** REPLACE [A 73-79, B 73-79]: Nodes parsed 112425 Find misses 97967 Nodes executed 509279 Find hits 137299 (26%) Find last hits 371980 (73%) Page faults 7920 Signals received 105 ******************** WITH: Nodes parsed 112049 Find misses 97229 Nodes executed 505442 Find hits 136722 (27%) Find last hits 368720 (72%) Page faults 7919 Signals received 106 ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Dosemu stsrts only one time in Putty 2011-10-11 16:00 ` Tomasz Skorupa @ 2011-10-15 2:20 ` Ivan Baldo 0 siblings, 0 replies; 6+ messages in thread From: Ivan Baldo @ 2011-10-15 2:20 UTC (permalink / raw) To: Tomasz Skorupa; +Cc: linux-msdos Hello. El 11/10/11 14:00, Tomasz Skorupa escribió: > W dniu 2011-10-11 15:18, Ivan Baldo pisze: >> Hello. >> Run DOSEmu, then run it once again so that it fails, write >> "exitemu" and then send the file ~/.dosemu/boot.log please, maybe >> there is some information. >> Thanks. >> > Hello Ivan. > I include two files. > boot.log.fail - this is what You want. > diffrences - fcomp result of compare two files boot.log.success when > dosemu start ok and boot.log.fail when dosemu starts with black screen. > > I check that dosemu -dumb command starts everytime properly > > Regards, > Tomasz Skorupa I just wanted to let you know that I don't know what else to do to help you. The boot.log file looks ok, also there isn't any meaningful difference between the two versions. Using -dumb works always. It should be some thing with the terminal emulation, but I don't know what could it be. Anyone else has any suggestion? If instead of Putty you run it using another Linux with "xterm" does it work always? Can you try a different terminal emulator for Windows (Putty is very fine though)? Good luck!!! P.s.: if you fix it, please let us know how you fixed it, so it gets stored on the mailing list archives. -- Ivan Baldo - ibaldo@adinet.com.uy - http://ibaldo.codigolibre.net/ From Montevideo, Uruguay, at the south of South America. Freelance programmer and GNU/Linux system administrator, hire me! Alternatives: ibaldo@codigolibre.net - http://go.to/ibaldo -- To unsubscribe from this list: send the line "unsubscribe linux-msdos" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2011-10-15 2:20 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2011-10-09 19:52 Dosemu stsrts only one time in Putty Tomasz Skorupa 2011-10-10 2:09 ` Frantisek Hanzlik 2011-10-10 16:44 ` Tomasz Skorupa 2011-10-11 13:18 ` Ivan Baldo 2011-10-11 16:00 ` Tomasz Skorupa 2011-10-15 2:20 ` Ivan Baldo
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox