From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mushroom Subject: Re: Terminal Video Problem Solved (and sound too!) Date: Mon, 02 Dec 2002 21:02:24 +0000 Sender: linux-msdos-owner@vger.kernel.org Message-ID: References: <3DEB392F.4050504@yahoo.com> Mime-Version: 1.0 Content-Transfer-Encoding: 7Bit Return-path: List-Id: Content-Type: text/plain; charset="us-ascii" To: linux-msdos@vger.kernel.org Hi >Stas Sergeev wrote: >> Mushroom wrote: > OK, try the attached patch. >> That's fixed it!!! > Great! > Hmm, that was just too easy, there > is still something fishy about that. > Do you have $_pci option disabled > or enabled? The pci option is disabled - have never enabled it. > If it is enabled, could you try to undo > the patch, set $_pci=(off) and reproduce > the problem? > Oh, please, do that carefully this time:) > The suggested way would be to just > erase and re-install the entire 1.1.3 > sources with 1.1.3.7 patchset (1.1.3.7 > patchset is an essential part here, as > 1.1.3.0 have its own problems with some > video boards). You may also use a default > dosemu.conf as $_pci is disabled there. > That way the chances of any mistake are > minimized. I effectively have that as the builds for 1.1.3.0 1.1.3.7 and 1.1.3.7 patched are all separate and am simply copying the binaries to the top of the dosemu tree created by 1.0.2.1 I will however re-do it just to make sure. > I want to be certain that it is not a > $_pci option guilty for your problems at > a first place. I am almost certain I have never changed that flag - in my dosemu.conf I have ORIGINAL then a value written next to the description of everything I've changed. There is no marker on this line and it says off. I shall however do as you say as I was obviously not at my most careful when I started on this :) >> The graphic card details no longer come up when dosemu starts > Yes, it was printed by the POST routines, > which are now bypassed. Thanks for the explanation. >> The console is left in video mode > Could you elaborate on that? The visible text part of the screen is 24 characters wide with the text stretched. The first line appears about quarter of the way down the screen. If for example I do a dir it appears split into 3 sections vertically down the screen: Correct version: [root@mushroom dosemu ]#dir bin conf FDChange.log mkhdimage README.bindist Xfonts boot.log dosemu freedos pauldos xdosemu [root@mushroom dosemu ]# What i see (stretched accross whole screen): GAP semu ]#dir FDChange.log mkhdimage freedos pauldos GAP khdimage README.bindlist auldos xdosemu GAP .bindist xfonts u > This happens only when you terminate dosemu > while in graphics mode, right? This happens whenever I enter dosemu on the console (as su or graphics are disabled) even if my only other command is exitemu. It effects all consoles. >How exactly are you terinating it? With exitemu. If I tab back to X without exiting the screen is dead as it was before but I can get back to x to kill the process. > I've never seen such a strange behaveour > here with my Radeon unless I was playing > with VESA (which is disabled for most > dosemu users including you). It does seem very strange. I hope to get round my mum & dad's later in the week and try a few different hardware combinations. Paul