Stas Sergeev wrote:

> Hello.
> 
> Ralph Alvy wrote:
>> I get now,  when attempting to load the app in question, is this:
> Please attach your boot.log.

Here's more detail I have extracted from this. With 1.3.1, I can't print
with hogthreshold at either 1 or 2. With 1.2.2, I can print with hog at 1
only if I switch back to the shell application that calls the app, and I
can print with hog at 2 without having to switch back to the shell
application at all.

With 1.3.1, if I attempt to kick off the printing by switching back to the
shell application, I get this:

ralvy@libranet:~/dosemu-1.3.1/bin$ ./xdosemu
ERROR: cpu exception in dosemu code outside of VM86()!
trapno: 0x0e  errorcode: 0x00000006  cr2: 0x053f3805
eip: 0x40165512  esp: 0xbffff79c  eflags: 0x00210207
cs: 0x0023  ds: 0x002b  es: 0x002b  ss: 0x002b
Page fault: write instruction to linear address: 0x053f3805
CPU was in user mode
Exception was caused by non-available page

Attached is my boot.log.