From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pavel@Janik.cz (=?iso-8859-15?q?Pavel_Jan=EDk?=) Subject: Dosemu 1.0.2 with graphics (without X) on ATI Rage XL? Date: Tue, 02 Sep 2003 12:04:21 +0200 Sender: linux-msdos-owner@vger.kernel.org Message-ID: Mime-Version: 1.0 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: List-Id: Content-Type: text/plain; charset="iso-8859-1" To: linux-msdos@vger.kernel.org Hi, is it possible to run dosemu in graphics mode with this card? I current= ly do have it running with T602 in it on Dell Optiplex GX150 with Intel 82= 815 chipset AGP card. The system I'd like to get running it on is Dell PowerEdge 400SC with t= his card in PCI bus: 02:00.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27= ) (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc: Unknown device 8008 Flags: bus master, stepping, medium devsel, latency 64, IRQ 21 Memory at fd000000 (32-bit, non-prefetchable) [size=3D16M] I/O ports at dd00 [size=3D256] Memory at fe9de000 (32-bit, non-prefetchable) [size=3D4K] Expansion ROM at fea00000 [disabled] [size=3D128K] Capabilities: [5c] Power Management version 2 00: 02 10 52 47 87 00 90 02 27 00 00 03 10 40 00 00 10: 00 00 00 fd 01 dd 00 00 00 e0 9d fe 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 08 80 30: 00 00 a0 fe 5c 00 00 00 00 00 00 00 05 01 08 00 Bus 2, device 0, function 0: Class 0300: PCI device 1002:4752 (rev 39). IRQ 21. Master Capable. Latency=3D64. Min Gnt=3D8. Non-prefetchable 32 bit memory at 0xfd000000 [0xfdffffff]. I/O at 0xdd00 [0xddff]. Non-prefetchable 32 bit memory at 0xfe9de000 [0xfe9defff]. I can provide other details as well. When I run the dosemu with the same configuration as I used on Optiplex 150, I see only the banner from dosemu and nothing else. Keyboard is working so I can switch to other console and kill dosemu. The config section right now contains: $_video =3D "vga" # one of: plainvga, vga, ega, mda, mga, cga $_console =3D (0) # use 'console' video $_graphics =3D (1) # use the cards BIOS to set graphics $_videoportaccess =3D (0) # allow videoportaccess when 'graphics' enabl= ed $_vbios_seg =3D (0xc000) # set the address of your VBIOS (e.g. 0xe000)= =20 $_vbios_size =3D (0x10000)# set the size of your BIOS (e.g. 0x8000) $_vmemsize =3D (1024) # size of regen buffer $_chipset =3D "plainvga" # one of: plainvga, trident, et4000, = diamond, avance # cirrus, matrox, wdvga, paradise, ati, s3, sis I tried using chipset ATI, with various vbios values but without success. Please CC me on reply, I'm not subscribed. --=20 Pavel Jan=EDk panic("kmem_cache_init(): Offsets are wrong - I've been messed with!"); -- 2.2.16 mm/slab.c - To unsubscribe from this list: send the line "unsubscribe linux-msdos" = in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html