Running dosemu as a user

["Victor Warner" <vwarner@waitrose.com>]

  unable to run Dosemu as a user. When I try to run xdosemu or dosemu as a  
user I get
the following message: "bash: dosemu: command not found".

There no are problems running from root (eg su from Konsole). A copy of  
MSDOS 6.22
is installed in /home/victor/dos. Running Linspire 5.0.59

I compiled from source code. After compilation Dosemu (1.3.1, 1.3.2 or  
1.3.3) is placed in

1. /etc/dosemu (containing dosemu.conf, dosemu.users, global.conf)
2. /usr/local/bin (containing dosemu.bin etc)
3. /usr/local/share (containing commands directory, xfonts directory,  
freedos directory etc).
4. /root/.dosemu/ (containing drives directory, run directory, etc)

I have looked through all the documentation (INSTALL, readme.txt, etc) but  
cannot see the
specific command or setting to deal with this (or cannot understand  
significance of what is
written) (tried adding "victor c_all" to dosemu.users but the problem  
still present).

Help in solving this would be gratefully received.

Content of boot.log and /root/.dosemurc below

Victor Warner


/root/.dosemurc
$_hdimage = "/home/victor/dos"
$_printer_command = "lpr -l"
$_printer = "hplj3030"
$_layout="uk"
$_X_font="vga12x30"

/root/.dosemu/boot.log

CONF: config variable parser_version_3 set
CONF: config variable c_system set
CONF: Parsing built-in dosemu.conf file.
CONF: config variable version_3_style_used set
CONF: Parsing built-in global.conf file.
CONF: config variable version_3_style_used unset
CONF: config variable version_3_style_used set
CONF: opened include file /etc/dosemu/dosemu.conf
CONF: closed include file /etc/dosemu/dosemu.conf
CONF: opened include file /root/.dosemurc
CONF: closed include file /root/.dosemurc
CONF: config variable skip_dosrc set
CONF: mapping driver = 'auto'
debug flags: -a+cw
CONF: Disabling use of pentium timer
CONF: dosbanner on
CONF: timer freq=18, update=54925
CONF: CPU set to 386
CONF: 8192k bytes XMS memory
CONF: 2048k bytes EMS memory
CONF: EMS-frame = 0xe000
CONF: DPMI-Server on
CONF: PM DOS API Translator on
CONF: dosemu running on _xterm
SER: directory /var/lock namestub LCK.. binary No
MOUSE: no device specified, type 0 using internaldriver: yes,  
emulate3buttons: no
baudrate: 0
CONF: Keyboard-layout keyb-user
CONF: Keyboard-layout uk
device: /dev/fd0 type 2 h: 0  s: 0   t: 0 floppy A:
CONF: fastfloppy = 1
CONF: IPX support off
CONF(LPT0) f: (null)   c: lpr -l  o: -Phplj3030  t: 20  port: 0
CONF: not allowing speaker port access
CONF: Packet Driver disabled.
device: /home/victor/dos type 4 h: -1  s: -1   t: -1 drive C:
CONF: config variable c_system unset
CONF: running exclusively as ROOT: uid=0 (cached 0) gid=0 (cached 0)
DBG_FD already set
DOSEMU-1.3.1.0 is coming up on Linux version 2.6.10
CONF: reserving 640Kb at 0x00000 for 'd' (Base DOS memory (first 640K))
CONF: reserving 64Kb at 0xF0000 for 'r' (Dosemu reserved area)
CPU: Stack bottom 0xbfffe000, top 0xc0000000, esp=0xbffff6c0
major = 136 minor = 1
CONF: reserving 128Kb at 0xA0000 for 'v' (Video memory)
SERIAL $Header: /cvsroot/dosemu/dosemu/src/base/serial/ser_init.c,v 1.9  
2004/05/07
13:49:45 stsp Exp $
CONF: reserving 64Kb at 0xE0000 for 'E' (EMS page frame)
TIME: using 9154 usec for updating ALRM timer
DOS termination requested
leavedos(0|0x0) called - shutting down