* Problem in using DOC2000
@ 2002-11-23 15:53 tin man chan
2002-11-23 16:03 ` Gregg C Levine
0 siblings, 1 reply; 3+ messages in thread
From: tin man chan @ 2002-11-23 15:53 UTC (permalink / raw)
To: linux-mtd
Hi,
I have compiled a linux kernel 2.4.19 with mtd driver
built-in and wish to use such kernel to probe the DOC
and use the DOC to boot my PC later by transferring
the kernel to DOC. However, after I insert the DOC
chip to the socket and start my PC, the PC will hang
in the booting message "Loading linux............."
Is it related to my PC BIOS? Or IDE harddisk conflict
with DOC? Any comment or idea? Thanks.
William
_________________________________________________________
人氣交友熱線#9351 話「友」就有
http://hk.yahoo.com/promotions/personals/9351
^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: Problem in using DOC2000
2002-11-23 15:53 Problem in using DOC2000 tin man chan
@ 2002-11-23 16:03 ` Gregg C Levine
0 siblings, 0 replies; 3+ messages in thread
From: Gregg C Levine @ 2002-11-23 16:03 UTC (permalink / raw)
To: linux-mtd
Hello from Gregg C Levine
You will need to supply us with more information with your project. Such
as, what motherboard does it use, and what distribution you are using.
And yes it might be a conflict. The first IDE drive in a Linux system,
is typically /dev/hda. Most DOCs are typically set to /dev//hdd, so as
to use the IDE chain that the CD drive is attached to.
-------------------
Gregg C Levine hansolofalcon@worldnet.att.net
------------------------------------------------------------
"The Force will be with you...Always." Obi-Wan Kenobi
"Use the Force, Luke." Obi-Wan Kenobi
(This company dedicates this E-Mail to General Obi-Wan Kenobi )
(This company dedicates this E-Mail to Master Yoda )
> -----Original Message-----
> From: linux-mtd-admin@lists.infradead.org [mailto:linux-mtd-
> admin@lists.infradead.org] On Behalf Of tin man chan
> Sent: Saturday, November 23, 2002 10:54 AM
> To: linux-mtd@lists.infradead.org
> Subject: Problem in using DOC2000
>
> Hi,
>
> I have compiled a linux kernel 2.4.19 with mtd driver
> built-in and wish to use such kernel to probe the DOC
> and use the DOC to boot my PC later by transferring
> the kernel to DOC. However, after I insert the DOC
> chip to the socket and start my PC, the PC will hang
> in the booting message "Loading linux............."
>
> Is it related to my PC BIOS? Or IDE harddisk conflict
> with DOC? Any comment or idea? Thanks.
>
> William
>
>
>
>
> _________________________________________________________
> ¤H®ð¥æ¤Í¼ö½u#9351 ¸Ü¡u¤Í¡v´N¦³
> http://hk.yahoo.com/promotions/personals/9351
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 3+ messages in thread
* Problem in using DOC2000
@ 2002-11-25 2:33 tin man chan
0 siblings, 0 replies; 3+ messages in thread
From: tin man chan @ 2002-11-25 2:33 UTC (permalink / raw)
To: linux-mtd
Hello Gregg C Levine,
Here is my machine config.
motherboard model: PCA-6179
bios: Pheonix Bios
cpu: PIII 700MHz
ram: 512MB
Thanks.
William
Hello from Gregg C Levine
You will need to supply us with more information with
your project. Such
as, what motherboard does it use, and what
distribution you are using.
And yes it might be a conflict. The first IDE drive in
a Linux system,
is typically /dev/hda. Most DOCs are typically set to
/dev//hdd, so as
to use the IDE chain that the CD drive is attached to.
-------------------
Gregg C Levine hansolofalcon@worldnet.att.net
------------------------------------------------------------
"The Force will be with you...Always." Obi-Wan Kenobi
"Use the Force, Luke."=A0 Obi-Wan Kenobi
(This company dedicates this E-Mail to General Obi-Wan
Kenobi )
(This company dedicates this E-Mail to Master Yoda )
> -----Original Message-----
> From: linux-mtd-admin@lists.infradead.org
[mailto:linux-mtd-
> admin@lists.infradead.org] On Behalf Of tin man chan
> Sent: Saturday, November 23, 2002 10:54 AM
> To: linux-mtd@lists.infradead.org
> Subject: Problem in using DOC2000
>=20
> Hi,
>=20
> I have compiled a linux kernel 2.4.19 with mtd
driver
> built-in and wish to use such kernel to probe the
DOC
> and use the DOC to boot my PC later by transferring
> the kernel to DOC. However, after I insert the DOC
> chip to the socket and start my PC, the PC will hang
> in the booting message "Loading linux............."
>=20
> Is it related to my PC BIOS? Or IDE harddisk
conflict
> with DOC? Any comment or idea? Thanks.
>=20
> William
>=20
>=20
>=20
>=20
>
_________________________________________________________
> =A4H=AE=F0=A5=E6=A4=CD=BC=F6=BDu#9351
=B8=DC=A1u=A4=CD=A1v=B4N=A6=B3
> http://hk.yahoo.com/promotions/personals/9351
>=20
>
______________________________________________________
> Linux MTD discussion mailing list
>
http://lists.infradead.org/mailman/listinfo/linux-mtd/
_________________________________________________________
人氣交友熱線#9351 話「友」就有
http://hk.yahoo.com/promotions/personals/9351
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2002-11-25 2:03 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-11-23 15:53 Problem in using DOC2000 tin man chan
2002-11-23 16:03 ` Gregg C Levine
-- strict thread matches above, loose matches on Subject: below --
2002-11-25 2:33 tin man chan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox