From: "Jörn Gruël" <gruel@inovision.de>
To: <linux-mtd@lists.infradead.org>
Subject: Problem with M-Systems DiskOnChip ...
Date: Wed, 13 Aug 2003 12:53:23 +0200 [thread overview]
Message-ID: <000501c36189$2819d020$32fefe0a@pc50> (raw)
Working with kernel version 2.4.18 (ELinOS distribution), I always got
messages like:
> DiskOnChip Millennium found at address 0xD0000
> Flash chip found: Manufacturer ID: 98, Chip ID: E6 (NAND 1MB 5V)
> 1 flash chips found. Total DiskOnChip size: 1 MiB
> Ignoring DiskOnChip 2000 at 0xD2000 - already configured
That's wrong, because I have the MD-2810-DO8 on board. wich definitely has
8MBytes space ... after that conflict not wondering about these later
messages:
> NFTL driver: nftlcore.c $Revision: 1.87 $, nftlmount.c $Revision: 1.31 $
> NFTL: UnitSizeFactor 0x00 detected. This violates the spec but we think we
know
> what it means...
> NFTL Media Header sanity check failed:
> numvunits (1988) > nb_blocks (256) - nb_boot_blocks(6) - 2
> Could not find valid boot record
> Could not mount NFTL device
I'm really starting to hate the manufacturer of our ELAN 540 boards for his
idea not to use an IDE flashdisk ... but possibly I'm stupid myself an make
mistakes never dreaming of?
I tried with doc514.exb, 514p.exb, doc42.exb and unformatted - all that done
by dos tool dformat from M-Systems website ... always I got results like the
one above ...
An other approach has been to do formatting via /dev/mtd/0 (eraseall,
nftlformat) - but that try was obviously the wrong one - after that I get
write errors with all M-Systems tools ...
Hopefully someone has any helpful hint for me,
best regards,
Joern.
next reply other threads:[~2003-08-13 10:53 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-08-13 10:53 Jörn Gruël [this message]
-- strict thread matches above, loose matches on Subject: below --
2003-08-13 12:25 Problem with M-Systems DiskOnChip Jörn Gruël
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000501c36189$2819d020$32fefe0a@pc50' \
--to=gruel@inovision.de \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox