From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from majordomo by infradead.org with local (Exim 3.20 #2) id 14pYJQ-0002Xa-00 for mtd-list@infradead.org; Tue, 17 Apr 2001 17:26:44 +0100 Reply-To: From: "Joakim Tjernlund" To: "'David Woodhouse'" Cc: , Subject: RE: CFI with 4 x8/x16 devices on a 32-bit bus Date: Tue, 17 Apr 2001 18:26:03 +0200 Message-ID: <000901c0c75b$18f38de0$0a01a8c0@Win1> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit In-Reply-To: <2093.987522793@redhat.com> Sender: owner-mtd@infradead.org List-ID: Great!! Wish I had the board here so I could bore you with even more questions :-) But I will have to wait several weeks ... Jocke -----Original Message----- From: David Woodhouse [mailto:dwmw2@redhat.com]On Behalf Of David Woodhouse Sent: Tuesday, April 17, 2001 17:53 To: joakim.tjernlund@lumentis.se Cc: kd@flaga.is; mtd@infradead.org Subject: Re: CFI with 4 x8/x16 devices on a 32-bit bus joakim.tjernlund@lumentis.se said: > I can place them at any physical(almost) address since they are > connected to the cpu's Chip Select logic. I figure I will place them > somewhere high starting at 0xf8000000. I can also make the address > space linear(no holes between the banks). > Now, can I just define WINDOW_ADDR 0xf8000000 and WINDOW_SIZE > 0x8000000 and specifiy my partitions without worrying about flash bank > boundries? (In my dreams or ...) That should work. -- dwmw2 To unsubscribe, send "unsubscribe mtd" to majordomo@infradead.org