From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from ip68-7-112-74.sd.sd.cox.net ([68.7.112.74] helo=clpanic.kennet.coplanar.net) by pentafluge.infradead.org with esmtp (Exim 3.22 #1 (Red Hat Linux)) id 16u1hl-0000fQ-00 for ; Sun, 07 Apr 2002 02:42:53 +0100 Message-ID: <001901c1ddd5$841955f0$7e0aa8c0@bridge> From: "Jeremy Jackson" To: "Eric W. Biederman" Cc: References: <004501c1ddac$1ca95f60$7e0aa8c0@bridge> Subject: Re: JEDEC programming command spec Date: Sat, 6 Apr 2002 17:34:30 -0800 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Sender: linux-mtd-admin@lists.infradead.org Errors-To: linux-mtd-admin@lists.infradead.org List-Help: List-Post: List-Subscribe: , List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: Got it. 3.5.x actually. Thanks, Jeremy ----- Original Message ----- From: "Eric W. Biederman" To: "Jeremy Jackson" Cc: Sent: Saturday, April 06, 2002 2:56 PM Subject: Re: JEDEC programming command spec > "Jeremy Jackson" writes: > > > I read everywhere about the JEDEC std. commands... > > but www.jedec.org only has CFI command set info. > > > > Can anyone point me to this info? Seems every vendor > > has some variation, but without the original to compare with, > > it seems impossible to know what is "standard" and what isn't. > > JESD21-C section 3.3.1 I think. > > Eric >