MTD in a 44B0X borad

["Wilson" <callwilson@gmail.com>]

Hi all,
Please give me a hand.. I need to get it done ASAP... Thanks.

I would like to enable MTD in S3C44B0X with NOR flash SST 39VF160.

When I erase mtd1, I got the following error messages:
/> eraseall /dev/mtd1
MTD_open
MTD_ioctl
Erasing 4 KibyteMTD_ioctl
 @ 0 --  0 % compInternal error: Oops: f9f4e
CPU: 0
pc : [<00028f9c>]    lr : [<0c7e0ac8>]    Not tainted
sp : 0c7ffc70  ip : 0c7ffbd8  fp : 00000000
r10: 0c7f0e84  r9 : 00000001  r8 : 0c7f0adc
r7 : 00000000  r6 : 00000023  r5 : 00000002  r4 : 0000096c
r3 : 000000ff  r2 : 00000014  r1 : 0c7ffc80  r0 : 00000023
Flags: nZcv  IRQs off  FIQs on  Mode SVC_32  Segment user
Control: 0
Process sh (pid: 30, stackpage=0c3af000)
Stack:
0c3affe0:

1) Do I need to modify the lock address 5555/2AAA in jedec_probe.c?
2) Do I need to modify the interrupt table(seems like an interrupt error)?

P.S The boot up message of uClinux: (It looks good to me)
s3c4510b flash device: 200000 at 1000000
Found: SST 39LF160/VF160
number of JEDEC chips: 1
Creating 2 MTD partitions on "SST39LF160 flash":
0x00000000-0x00160000 : "Reserved for bootloader and kernel (1408kB)"
mtd: Giving out device 0 to Reserved for bootloader and kernel (1408kB)
0x00170000-0x001b0000 : "user partition (256K)"
mtd: Giving out device 1 to user partition (256K)
init_mtdchar: allocated major number 90.
init_mtdblock: allocated major number 30.

Any other things I missed here?

Many Thanks,
Wilson