From: "Ho-Kuo Chan" <hchan@wavesat.com>
To: <linux-mtd@lists.infradead.org>
Subject: Trouble indetifying FLASH part
Date: Wed, 15 May 2002 16:50:17 -0400 [thread overview]
Message-ID: <003801c1fc52$1eb60e10$0200010a@WT0136> (raw)
Hi,
I have a PPC405GP based board with a single AMD compatible Toshiba
TC58FVB321FT 4MB flash in word mode. The chip is physically mapped to
address 0x8000000 and according to the Data Sheet, is CFI compatible. I
believe I have properly configured the kernel but I can't seem to get my
chip identified. Am I missing sonething? Any help is greatly appreciated!!
This is my config:
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
CONFIG_MTD_DEBUG=y
CONFIG_MTD_DEBUG_VERBOSE=3
# CONFIG_MTD_PARTITIONS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CHAR=y
# CONFIG_MTD_BLOCK is not set
# CONFIG_MTD_BLOCK_RO is not set
CONFIG_FTL=y
# CONFIG_NFTL is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_CFI_B1=y
CONFIG_MTD_CFI_B2=y
CONFIG_MTD_CFI_B4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y
CONFIG_MTD_OBSOLETE_CHIPS=y
CONFIG_MTD_AMDSTD=y
# CONFIG_MTD_SHARP is not set
CONFIG_MTD_JEDEC=y
#
# Mapping drivers for chip access
#
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0x4000000
CONFIG_MTD_PHYSMAP_BUSWIDTH=2
# CONFIG_MTD_TQM8XXL is not set
# CONFIG_MTD_RPXLITE is not set
# CONFIG_MTD_DBOX2 is not set
# CONFIG_MTD_CFI_FLAGADM is not set
# CONFIG_MTD_REDWOOD is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set
# CONFIG_MTD_DOC1000 is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOCPROBE is not set
#
# NAND Flash Device Drivers
#
# CONFIG_MTD_NAND is not set
Ho-Kuo Chan
next reply other threads:[~2002-05-15 20:47 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <001301c1fcd9$76792c40$0200010a@WT0136>
2002-05-15 20:50 ` Ho-Kuo Chan [this message]
2002-05-16 12:33 ` Trouble indetifying FLASH part David Woodhouse
[not found] ` <5240.1021554647@redhat.com>
2002-05-16 13:36 ` Ho-Kuo Chan
2002-05-16 13:37 ` David Woodhouse
2002-05-16 14:12 ` Ho-Kuo Chan
2002-05-16 14:15 ` David Woodhouse
2002-05-16 14:52 ` Ho-Kuo Chan
2002-05-16 15:01 ` David Woodhouse
2002-05-16 17:37 ` Ho-Kuo Chan
2002-05-23 21:19 ` Ho-Kuo Chan
2002-05-23 21:44 ` David Woodhouse
2002-05-24 14:09 ` Ho-Kuo Chan
2002-05-16 6:53 Jim Zeus
-- strict thread matches above, loose matches on Subject: below --
2002-05-16 13:25 Ho-Kuo Chan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='003801c1fc52$1eb60e10$0200010a@WT0136' \
--to=hchan@wavesat.com \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox