* R: Newly-erased Block...
@ 2005-08-08 9:38 Calò Massimo
0 siblings, 0 replies; only message in thread
From: Calò Massimo @ 2005-08-08 9:38 UTC (permalink / raw)
To: ucLinux-Mtd@Lists. Infradead. Org
> >
> > JFFS2 issued the erase command then found that the block
> > contains some
> > trash. That's not JFFS2's fault. Dig your flash driver/hardware.
I think that the problem is not in the erase command because in the function
"do_erase_oneblock" after
the erase command (file linux2.4.x/drivers/mtd/chips/cfi_cmdset_0002.c line
880)I tested the value of "oldstatus" and "status" variables : they have
always the same value... According to the toggle method it means that the
block has been erased (if I had understood?!?).
...please can you tell me what happen after one partition has been erased?
How does the "mount" command expect to find the erased partition? With all
bytes to 0xff or does it look for some data?
Thanks!
Massimo.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-08-08 9:38 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-08-08 9:38 R: Newly-erased Block Calò Massimo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox