* SC520 CDP: When I set the CFG1 switch to ON --> nb0 command says that bank not presen
@ 2001-05-04 7:50 Alexander Melichenko
0 siblings, 0 replies; only message in thread
From: Alexander Melichenko @ 2001-05-04 7:50 UTC (permalink / raw)
To: Vipin Malik; +Cc: linux-mtd
Hello, Vipin!
I want to place the lstart16.abs file to BIOS flash memory (29F040-DIP). In
lstart16.asm I found that it necessary set the CFG1 switch to ON. But when I
run :
z
yi
nb0
I see a message : bank not present.
When I set CFG1 to OFF the command "nb0" works fine :
changed to bank 0, 512 KB, Device 29F040
Would You help me?
Thank You.
Alexander Melichenko.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2001-05-04 8:49 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-05-04 7:50 SC520 CDP: When I set the CFG1 switch to ON --> nb0 command says that bank not presen Alexander Melichenko
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox