From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from h154.195-230-144.ukrpack.net ([195.230.144.154] helo=srv1.lrpeople.com) by pentafluge.infradead.org with esmtp (Exim 3.22 #1 (Red Hat Linux)) id 14vbHQ-0002Iz-00 for ; Fri, 04 May 2001 09:49:42 +0100 Message-ID: <003e01c0d46e$d5c19aa0$5502010a@lrpeople.com> From: "Alexander Melichenko" To: "Vipin Malik" Cc: Subject: SC520 CDP: When I set the CFG1 switch to ON --> nb0 command says that bank not presen Date: Fri, 4 May 2001 11:50:06 +0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Sender: linux-mtd-admin@lists.infradead.org Errors-To: linux-mtd-admin@lists.infradead.org List-Help: List-Post: List-Subscribe: , List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: Hello, Vipin! I want to place the lstart16.abs file to BIOS flash memory (29F040-DIP). In lstart16.asm I found that it necessary set the CFG1 switch to ON. But when I run : z yi nb0 I see a message : bank not present. When I set CFG1 to OFF the command "nb0" works fine : changed to bank 0, 512 KB, Device 29F040 Would You help me? Thank You. Alexander Melichenko.