From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from ip68-7-112-74.sd.sd.cox.net ([68.7.112.74] helo=clpanic.kennet.coplanar.net) by pentafluge.infradead.org with esmtp (Exim 3.22 #1 (Red Hat Linux)) id 16tx4v-0000PY-00 for ; Sat, 06 Apr 2002 21:46:29 +0100 Received: from bridge (bridge.kennet.coplanar.net [192.168.10.126] (may be forged)) by clpanic.kennet.coplanar.net (8.11.6/8.11.2) with SMTP id g36KkRl17913 for ; Sat, 6 Apr 2002 12:46:27 -0800 Message-ID: <004501c1ddac$1ca95f60$7e0aa8c0@bridge> From: "Jeremy Jackson" To: Subject: JEDEC programming command spec Date: Sat, 6 Apr 2002 12:46:17 -0800 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Sender: linux-mtd-admin@lists.infradead.org Errors-To: linux-mtd-admin@lists.infradead.org List-Help: List-Post: List-Subscribe: , List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: I read everywhere about the JEDEC std. commands... but www.jedec.org only has CFI command set info. Can anyone point me to this info? Seems every vendor has some variation, but without the original to compare with, it seems impossible to know what is "standard" and what isn't. Thanks, Jeremy