Re: Flash programming

Re: Flash programming

[Subrahmanyam]

Hi Craig,

Thank you, actually our target comprises of an intel processor(iop80321), a 
flash(Intel NOR) and a ram, two usb ports and a ieee1394 port. In the flash 
there are drivers for existing system to work, my present requirement is to 
store a certain key/data/string in the flash, which shall be dynamically be 
modifiable by an user interface provided to the host, when connected to the 
target either through usb/firewire ports.

Firstly, I have looked into mtd drivers to store data (which basically is a 
key, a group of characters) in the flash, but I am not clear whether this 
will work or I have to look into jffs2 file system also, basically my path 
is not clear whether I have to use mtd/jffs2.

I will be thankful if you can suggest an approach, for storing the key
(group of characters).

Thanks,
Subrahmanyam.


----- Original Message ----- 
From: "Craig Hollabaugh" <craig@hollabaugh.com>
To: "Subrahmanyam" <subrahmanyam@navayuga.co.in>
Sent: Thursday, December 16, 2004 03:55 AM
Subject: Re: Flash programming


> On Wed, Dec 15, 2004 at 05:25:49PM +0530, Subrahmanyam wrote:
>> Can you please help me write into the flash, my present requirement is to
>> store a certain key/data/string in the flash, which shall be dynamically 
>> be
>> modifiable by an user interface provided to the host, when connected to 
>> the
>> target either through usb/firewire ports.
>
> which processor, which board, what kind of flash?
>