From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from [202.98.123.42] (helo=mail.ocdtt.com ident=postfix) by pentafluge.infradead.org with esmtp (Exim 3.22 #1 (Red Hat Linux)) id 16SrcH-0006th-00 for ; Tue, 22 Jan 2002 03:28:57 +0000 Message-ID: <004a01c1a2f6$85633350$0c1112ac@ming> From: "Chen Yaoming" To: , "Jeroen Roose" References: <200201211137.MAA19110@enterprise.chess.nl> Subject: Re: Intel C3 chips Date: Tue, 22 Jan 2002 11:40:20 +0800 MIME-Version: 1.0 Content-Type: text/plain; charset="gb2312" Content-Transfer-Encoding: 7bit Sender: linux-mtd-admin@lists.infradead.org Errors-To: linux-mtd-admin@lists.infradead.org List-Help: List-Post: List-Subscribe: , List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: MTD can unlock Intel C3 flash, but the code is incomplete. Please look at drivers/mtd/chips/cfi_cmdset_0001.c ----- Original Message ----- From: "Jeroen Roose" To: Sent: Monday, January 21, 2002 7:37 PM Subject: Intel C3 chips > Hello, > > We've got a board based on the CDB89712 but using C3 (TE28F320/C3BC90) in > stead of the B3 version. The C3 chip locks all blocks on chip reset. I've > patched the bootloader (hermit) to unlock all blocks on boot. > I've got MTD/JFFS2 working on the board, with the bootloader patch, but I > think MTD should unlock the blocks. > I'm not familiar with the MTD architecture, so I don't no how/where to > implement this, can You help me to point this out ? > > Thanks, > > Jeroen Roose > > chess eT > > http://www.chess.nl > > ______________________________________________________ > Linux MTD discussion mailing list > http://lists.infradead.org/mailman/listinfo/linux-mtd/