From: "Sameer" <x0081444@ti.com>
To: <linux-mtd@lists.infradead.org>
Subject: JFFS2 mount problem on NAND flash
Date: Thu, 3 Jan 2008 18:52:29 +0530 [thread overview]
Message-ID: <00dc01c84e0b$b10fab20$ec8818ac@ent.ti.com> (raw)
Hi,
I am working on omap based board with 16bit, small page Samsung NAND of size 64MB.
I have enabled hardware ecc functionality in the driver code. To test the functionality I run the
Following tests.
1. When the kernel comes up, >>cat /proc/mtd
mtd0: 00040000 00020000 "bootloader"
mtd1: 00020000 00020000 "params"
mtd2: 00200000 00020000 "kernel"
mtd3: 03da0000 00020000 "filesystem"
mtd4: 00080000 00004000 "NAND-X-Loader"
mtd5: 00080000 00004000 "NAND-U-Boot"
mtd6: 00040000 00004000 "NAND-U-Boot Environment"
mtd7: 00400000 00004000 "NAND-Kernel"
mtd8: 03ac0000 00004000 "NAND-File System"
2. I erase the NAND flash filesystem partition
./flash_eraseall /dev/mtd8
This function passes. I have verified the erase functionality using the debugger.
3 mount -t jffs2 /dev/mtdblock8 /mnt/nand. I have enabled the low level jffs2 fs debugging
Following is the error message
JFFS2: Erase block at 0x00000000 is not formatted. It will be erased
JFFS2: Erase block at 0x00004000 is not formatted. It will be erased
JFFS2: Erase block at 0x00008000 is not formatted. It will be erased
JFFS2: Erase block at 0x0000c000 is not formatted. It will be erased
JFFS2: Erase block at 0x00010000 is not formatted. It will be erased
JFFS2: Erase block at 0x00014000 is not formatted. It will be erased
JFFS2: Erase block at 0x00018000 is not formatted. It will be erased
JFFS2: Erase block at 0x0001c000 is not formatted. It will be erased
-----
=----
upto--
JFFS2: Erase block at 0x03a9c000 is not formatted. It will be erased
JFFS2: Erase block at 0x03aa0000 is not formatted. It will be erased
JFFS2: Erase block at 0x03aa4000 is not formatted. It will be erased
JFFS2: Erase block at 0x03aa8000 is not formatted. It will be erased
FFS2: Erase block at 0x03aac000 is not formatted. It will be erased
JFFS2: Erase block at 0x03ab0000 is not formatted. It will be erased
JFFS2: Erase block at 0x03ab4000 is not formatted. It will be erased
JFFS2: Erase block at 0x03ab8000 is not formatted. It will be erased
JFFS2: Erase block at 0x03abc000 is not formatted. It will be erased
Cowardly refusing to erase blocks on filesystem with no valid JFFS2 nodes
mpty_blocks 0, bad_blocks 0, c->nr_blocks 3760
mount: Mounting /dev/mtdblock8 on /mnt/nand failed: Input/output error
But when I enable the SW_ECC functionalilty I am able to mount the jffs2 fs and perform the fs operations
I am beginner for JFFS2 fs.Could you please let me know what causes this error.
Regards,
-Sameer
next reply other threads:[~2008-01-03 13:22 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <AchOC7Aeq8/iWL2SSKmE/WuZCJ0fIw==>
2008-01-03 13:22 ` Sameer [this message]
2008-01-03 13:34 ` JFFS2 mount problem on NAND flash Sudeep K N
2008-05-07 10:26 ` Ram
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='00dc01c84e0b$b10fab20$ec8818ac@ent.ti.com' \
--to=x0081444@ti.com \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox