From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from ip101.enterness.net ([195.138.130.101] helo=empdc.emness) by pentafluge.infradead.org with esmtp (Exim 3.22 #1 (Red Hat Linux)) id 15JxIw-0006JD-00 for ; Tue, 10 Jul 2001 14:11:54 +0100 Content-Type: text/plain; charset="windows-1251" From: Anton Todorov To: Steve Kranz Subject: Re: MTD on MBX860 Date: Tue, 10 Jul 2001 16:13:54 -0200 References: <01071015225100.01159@ronin> <3B4AF9E1.92E1A0FD@ridgerun.com> In-Reply-To: <3B4AF9E1.92E1A0FD@ridgerun.com> Cc: linux-mtd@lists.infradead.org MIME-Version: 1.0 Message-Id: <01071016135401.01159@ronin> Content-Transfer-Encoding: 8bit Sender: linux-mtd-admin@lists.infradead.org Errors-To: linux-mtd-admin@lists.infradead.org List-Help: List-Post: List-Subscribe: , List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: On Tuesday 10 July 2001 10:49, you wrote: > > I am using linuxppc_2_4 (2.4.6) with current mtd > > support from cvs tree. The board is with JEDEC AMD > > 29F016 x4 flash chips (8M Flash space). Map file which > > I use for this board is attached (I use rpxlite.c and > > tqm8xxl.c (for partitioning) as reference). The > > problem I found is that mtd says: > > > > "mtd: Failed. Cannot handle unsymetric banking" > > Did you mean AMD29F160 (instead of AMD29F016)? If so, > I have a data sheet on my desk here that shows block sizes of: > > #1 8K > #2 4K > #3 4K > #4 16K > #5 32K > .... > #35 32K > no. iIt is exactly AM29F016B-90EC and is only JEDEC compatible. Regards, Anton Todorov Emness Technology