From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from demai05.mw.mediaone.net ([24.131.1.56]) by pentafluge.infradead.org with esmtp (Exim 3.22 #1 (Red Hat Linux)) id 15eTWx-00023b-00 for ; Wed, 05 Sep 2001 04:39:11 +0100 Received: from amdk62300 (nic-131-c228-152.mw.mediaone.net [24.131.228.152]) by demai05.mw.mediaone.net (8.11.1/8.11.1) with SMTP id f853jEY00682 for ; Tue, 4 Sep 2001 23:45:14 -0400 (EDT) From: Robert Warner To: linux-mtd@lists.infradead.org Subject: list-newbie ... Have an Intel Flash E28F128 and want to ... Date: Tue, 4 Sep 2001 23:50:37 -0400 Content-Type: text/plain; charset="iso-8859-1" MIME-Version: 1.0 Message-Id: <01090423503703.03804@amdk62300> Content-Transfer-Encoding: quoted-printable Sender: linux-mtd-admin@lists.infradead.org Errors-To: linux-mtd-admin@lists.infradead.org List-Help: List-Post: List-Subscribe: , List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: Hi=20 This may or may not be off topic ... just let me know. I purchased a 3Com Audrey in the hopes to get Linux on it. I'm currently= =20 looking at LinuxBIOS (and other possibilities). It has a CFI Flash on it= and=20 am curious how to program the flash in-circuit. In reading your How-To i noted the JFFS2 for embedded systems. I curious= =20 about the following: 1. In-circuit programming of CFI flashes .. is this feasible? does a util= ity=20 already exist? 2. How do I get the JFFS2 and Linux on this device? ... maybe I need to r= ead=20 the How-TO a little more ... Thanks in advance for your input Robert Warner