From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from pd9eb987a.dip.t-dialin.net ([217.235.152.122] helo=thomas.tec.autronix.de) by pentafluge.infradead.org with esmtp (Exim 3.22 #1 (Red Hat Linux)) id 16fPsj-0003ep-00 for ; Mon, 25 Feb 2002 18:29:50 +0000 Content-Type: text/plain; charset="iso-8859-1" From: Thomas Gleixner Reply-To: gleixner@autronix.de To: Radu Corlan Subject: Re: problem in nand.c v 1.16 Date: Mon, 25 Feb 2002 19:44:32 +0100 References: In-Reply-To: Cc: linux-mtd@lists.infradead.org, David Woodhouse MIME-Version: 1.0 Message-Id: <0202251944320H.03406@thomas> Content-Transfer-Encoding: 8bit Sender: linux-mtd-admin@lists.infradead.org Errors-To: linux-mtd-admin@lists.infradead.org List-Help: List-Post: List-Subscribe: , List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: On Tuesday, 26. February 2002 02:11, Radu Corlan wrote: > I'm using the nand driver with a Toshiba TC58256 flash chip. We have found > that the delay at the end of nand_command (currently 15us) is not enough > for this part (the datasheet calls for 25us). Before making the change, we > got a 0xff instead of the first byte of the page. > Please take this into account in the next revision. Please keep such discussions on the mailing-list ! Maybe we can solve it with a additional entry in the nand_chip structure. -- Thomas __________________________________________________ Thomas Gleixner, autronix automation GmbH auf dem berg 3, d-88690 uhldingen-muehlhofen fon: +49 7556 919891 , fax: +49 7556 919886 mail: gleixner@autronix.de, http://www.autronix.de