From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from natpost.webmailer.de ([192.67.198.65] helo=post.webmailer.de) by pentafluge.infradead.org with esmtp (Exim 3.22 #1 (Red Hat Linux)) id 17L4ky-000883-00 for ; Thu, 20 Jun 2002 17:26:00 +0100 Content-Type: text/plain; charset="iso-8859-1" From: Thomas Gleixner Reply-To: gleixner@autronix.de To: Jason Chan , linux-mtd@lists.infradead.org Subject: Re: How to configure MTD so that JFFS2 work on 7312 NandFlash? Date: Thu, 20 Jun 2002 18:21:40 +0200 References: <3D0EA22F.9050801@emsoftltd.com> In-Reply-To: <3D0EA22F.9050801@emsoftltd.com> MIME-Version: 1.0 Message-Id: <02062018214001.01082@linuxtest> Content-Transfer-Encoding: 8bit Sender: linux-mtd-admin@lists.infradead.org Errors-To: linux-mtd-admin@lists.infradead.org List-Help: List-Post: List-Subscribe: , List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: On Tuesday, 18. June 2002 04:59, Jason Chan wrote: > Hi all, > I am trying to configure MTD NandFlash and JFFS2 on EP7312 NandFlash > driver. > However, when I try to access, it output "I/O Error". > But when the kernel bootup, I can see that the kernel successfully find > out the nandflash device. So how can I make the JFFS2 and MTD work on 7312? please read http://www.linux-mtd.infradead.org/tech/nand.html : Config settings -- Thomas ________________________________ Thomas Gleixner - autronix automation http://www.autronix.de gleixner@autronix.de