From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from post2.inre.asu.edu ([129.219.110.73]) by pentafluge.infradead.org with esmtp (Exim 3.22 #1 (Red Hat Linux)) id 16v1UE-0005up-00 for ; Tue, 09 Apr 2002 20:41:02 +0100 Received: from conversion.post2.inre.asu.edu by asu.edu (PMDF V6.1 #40111) id <0GUB00901G00PL@asu.edu> for linux-mtd@lists.infradead.org; Tue, 09 Apr 2002 12:40:48 -0700 (MST) Date: Tue, 09 Apr 2002 12:42:50 -0700 From: Russ Dill Subject: Re: root jffs2 filesystem on blkmtd emulated device In-reply-to: <20020409114205.A21994@ns2.forestsidingsupply.com> To: Mike Mattice Cc: linux-mtd@lists.infradead.org Message-id: <1018381371.15728.3.camel@russ> MIME-version: 1.0 Content-type: text/plain Content-transfer-encoding: 7bit References: <20020409114205.A21994@ns2.forestsidingsupply.com> Sender: linux-mtd-admin@lists.infradead.org Errors-To: linux-mtd-admin@lists.infradead.org List-Help: List-Post: List-Subscribe: , List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: On Tue, 2002-04-09 at 09:42, Mike Mattice wrote: > I've got a flash based ide module which is too small for my needs w/o > compression. So, I'm trying to get this to use jffs2 as it's root > filesystem type. I've run into a bit of a problem. > > After applying the following patch, using the attached config, and passing > 'blkmtd=/dev/hdc2' to the kernel and setting the root device to > '/dev/mtdblock/0' via lilo, I get this on the console. (hand typed, but > should be very close) good debugging, it was fixed in october, but due to some cvs snafu, has never made it into the 2.4 kernels. Just remove the invalidate_device call