From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from fed1mtao04.cox.net ([68.6.19.241]) by pentafluge.infradead.org with esmtp (Exim 3.22 #1 (Red Hat Linux)) id 178lCz-0006CA-00 for ; Fri, 17 May 2002 18:08:01 +0100 Subject: Re: Getting big flash onto motherboards. Will CF work? what will? From: Russ Dill To: Ronald G Minnich Cc: David Woodhouse , "Richard A. Smith" , "linuxbios@lanl.gov" , linux-mtd@lists.infradead.org In-Reply-To: References: Content-Type: text/plain Content-Transfer-Encoding: 7bit Date: 17 May 2002 10:08:01 -0700 Message-Id: <1021655281.27483.0.camel@timmy> Mime-Version: 1.0 Sender: linux-mtd-admin@lists.infradead.org Errors-To: linux-mtd-admin@lists.infradead.org List-Help: List-Post: List-Subscribe: , List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: > Are there other options? These are 1U or .8U spaces most likely, and so a > big PCI card is out of the question -- that's needed for Myrinet. There > are no ISA slots. There are two IDE headers, and possibly a SCSI header. A > very low profile PCI card might work. The only option I was aware of was > IDE->CF adapaters. Is there something else I should look at? there are DOC devices that plug into IDE