* intel 28F016B3 flash
@ 2002-10-24 13:37 Jim Stewart
2002-10-28 14:25 ` Geoffrey Espin
0 siblings, 1 reply; 2+ messages in thread
From: Jim Stewart @ 2002-10-24 13:37 UTC (permalink / raw)
To: linux-mtd
Can some one list for me the list of kernel configuration options/files
needed to use the MTD with JFFS2 on the following system:
4 - TE28F016B3 flash chips connected as a 32 bit wide x 2Mb flash bank
These chips do not support CFI and are physically connected to the
processor memory bus (0x0C00_0000-0x0C7f_ffff)
Thanks....
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: intel 28F016B3 flash
2002-10-24 13:37 intel 28F016B3 flash Jim Stewart
@ 2002-10-28 14:25 ` Geoffrey Espin
0 siblings, 0 replies; 2+ messages in thread
From: Geoffrey Espin @ 2002-10-28 14:25 UTC (permalink / raw)
To: Jim Stewart; +Cc: linux-mtd
On Thu, Oct 24, 2002 at 09:37:33AM -0400, Jim Stewart wrote:
> Can some one list for me the list of kernel configuration options/files
> needed to use the MTD with JFFS2 on the following system:
> 4 - TE28F016B3 flash chips connected as a 32 bit wide x 2Mb flash bank
> These chips do not support CFI and are physically connected to the
> processor memory bus (0x0C00_0000-0x0C7f_ffff)
I gutted the mtd/devices/lart.c driver and used it as a basis for
my single 16b wide part.
Geoff
--
Geoffrey Espin
espin@idiom.com
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2002-10-30 12:03 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-10-24 13:37 intel 28F016B3 flash Jim Stewart
2002-10-28 14:25 ` Geoffrey Espin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox