Re: Problems with DiskOnChip 2000

Dmitry Skorinko
2004-10-04T17:36:00Z

> On Fri, 2004-10-01 at 16:58, Dmitry wrote:
> > Hi, all
> >
> > I have pc104 system ICOP-6070 with DiskOnChip 2000 on it..
> > Here is task to install linux OS on this system..
> > With Knoppix 3.6 CD I start linux and try load drivers for this flash disk
for
> > next step with installation on it, but modules don't see chip on board...
> >
> > kernel 2.6.8:
> > #insmod mtdcore
> > #insmod nand_ids
> > #insmod docecc
> > #insmod doc2000
> > #insmod docprobe
> > and i have:
> > Resource temporarily unavailable

oops, it's mistake. Knoppix 3.6 has 2.6.7 kernel....

>
> Use the new diskonchip driver in drivers/mtd/nand. The old drivers are
> DEPRECATED (See Kernel config) and will be removed in the near future.
>
> > kernel 2.4.27:
> > Unknown flash chip found: 81 81
> > Please report to dwmw2@infradead.org
> > No flash chips recognised.
> > Possible DiskOnChip with unknown ChipID 36 found at 0xe8000
> > Possible DiskOnChip with unknown ChipID C6 found at 0xea000
> > Possible DiskOnChip with unknown ChipID F6 found at 0xec000
> > Possible DiskOnChip with unknown ChipID C1 found at 0xee000
>
> None of those ID's is a valid chip ID except the 0x36, which is a
> 64MiB,1.8V chip. I doubt, that there are DoC's available with 1.8V
> supply. The stuff looks more like random nonsense.
>
> Use a recent 2.6 kernel with the new diskonchip driver. We don't know
> which kernel modifications are on the Knoppix CD, so please use a kernel
> >= V2.6.8.1 from kernel.org and if the problems persist the latest MTD
> patches from the MTD website.
>
> tglx

ok, I wil do install linux diskette with 2.6.8.1
but what modules i must have there??

what about 2.4.x kernel? Will these new drivers included in this kernels? With
2.6 I must rewrite other self drivers and it's not best way for me...

Dmitry