From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from webapps.arcom.com ([194.200.159.168]) by canuck.infradead.org with esmtp (Exim 4.43 #1 (Red Hat Linux)) id 1DbeLY-00037j-MD for linux-mtd@lists.infradead.org; Fri, 27 May 2005 08:53:53 -0400 From: Ian Campbell To: David Woodhouse In-Reply-To: <1117197443.12591.216.camel@hades.cambridge.redhat.com> References: <20050526152256.GS6681@pengutronix.de> <4295ED9E.6000508@arcom.com> <4295EE70.8000608@imc-berlin.de> <4295F3A4.70303@arcom.com> <20050526164635.GT6681@pengutronix.de> <1117197443.12591.216.camel@hades.cambridge.redhat.com> Content-Type: text/plain Date: Fri, 27 May 2005 13:53:00 +0100 Message-Id: <1117198382.384.10.camel@icampbell-debian> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Cc: Robert Schwebel , linux-mtd@lists.infradead.org Subject: Re: Fast rollout process on jffs2? List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On Fri, 2005-05-27 at 13:37 +0100, David Woodhouse wrote: > On Thu, 2005-05-26 at 18:46 +0200, Robert Schwebel wrote: > > Hmm, sounds good, but that probably means that the jffs2 images have to > > be the full flash size (which is 32 MB in my case) compared to about 8 > > MB at the moment? > > You don't have to pad the image. If you use the '-j' argument to > RedBoot's 'fis create' command, it'll erase the extra space and write > cleanmarkers for you. That doesn't seem to be in upstream CVS, is it very new or unmerged? Ian. -- Ian Campbell, Senior Design Engineer Web: http://www.arcom.com Arcom, Clifton Road, Direct: +44 (0)1223 403 465 Cambridge CB1 7EA, United Kingdom Phone: +44 (0)1223 411 200