From: Jean-Philippe Francois <jp.francois@cynove.com>
To: jbi130@yahoo.com
Cc: linux-mtd@lists.infradead.org
Subject: Re: Support for Intel strataflash.
Date: Tue, 19 Jul 2005 18:30:05 +0200 [thread overview]
Message-ID: <1121790604.2565.61.camel@fedorabox> (raw)
In-Reply-To: <87u0iq7r6o.fsf@nimrod.unx.ca>
On Tue, 2005-07-19 at 17:26, jbi130@yahoo.com wrote:
> I recently receive a PPC8555 evaluation board with 8 MB Intel
> strataflash ROM. I'm using 2.6.12 and am trying to get this setup as
> an MTD device for use with JFFS2.
>
> On boot all I see is:
> physmap flash device: 800000 at ff800000
>
> (the flash is at physical address 0xff800000).
>
> I also had to enable 'Support for ROM chips in bus mapping' for this
> physmap to take place.
>
> I'm assuming that the CFI probe isn't properly detecting this chip.
> Does that mean that it isn't fully supported? I use similar options
> on a similar board that uses AMD flash and it works fine.
>
In the RAM/ROM/FLash chip driver section, did you select
Detect flash chips by CFI probe
and
Support for Intel/Sharp flash chip ?
JP Francois
prev parent reply other threads:[~2005-07-19 16:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-07-19 15:26 Support for Intel strataflash jbi130
2005-07-19 16:30 ` Jean-Philippe Francois [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1121790604.2565.61.camel@fedorabox \
--to=jp.francois@cynove.com \
--cc=jbi130@yahoo.com \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox