From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mgw-ext11.nokia.com ([131.228.20.170]) by canuck.infradead.org with esmtps (Exim 4.62 #1 (Red Hat Linux)) id 1GkiiP-0003DR-IX for linux-mtd@lists.infradead.org; Thu, 16 Nov 2006 09:59:51 -0500 Subject: Re: Problem with copying more than 2kb file into the flash From: Artem Bityutskiy To: "s.balamurugan" In-Reply-To: <455C7650.2000705@gdatech.co.in> References: <455C7650.2000705@gdatech.co.in> Content-Type: text/plain; charset=utf-8 Date: Thu, 16 Nov 2006 16:38:49 +0200 Message-Id: <1163687929.5597.18.camel@sauron> Mime-Version: 1.0 Content-Transfer-Encoding: quoted-printable Cc: linux-mtd@lists.infradead.org Reply-To: dedekind@infradead.org List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On Thu, 2006-11-16 at 20:01 +0530, s.balamurugan wrote: > Upon remounting, the file is lost or showing a size of 0. Upon scanning = the > flash at mount I will always get "jffs2_get_inode_nodes(): Data CRC faile= d > on node at ..." =20 >=20 > I don't know where is the problem either in my nand driver or= jffs2 code >=20 > Has anyone experienced this and have any ideas? Any help would be much > appreciated. I would start from making sure the that your flash driver is all right. --=20 Best regards, Artem Bityutskiy (=D0=91=D0=B8=D1=82=D1=8E=D1=86=D0=BA=D0=B8=D0=B9 =D0=90= =D1=80=D1=82=D1=91=D0=BC)