From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from smtp.nokia.com ([131.228.20.172] helo=mgw-ext13.nokia.com) by canuck.infradead.org with esmtps (Exim 4.63 #1 (Red Hat Linux)) id 1Gx1dO-0001hy-67 for linux-mtd@lists.infradead.org; Wed, 20 Dec 2006 08:37:27 -0500 Subject: Re: Intel flash From: Artem Bityutskiy To: Darshak In-Reply-To: <4589385B.00000B.01208@ELITECORE1561> References: <4589385B.00000B.01208@ELITECORE1561> Content-Type: text/plain; charset=utf-8 Date: Wed, 20 Dec 2006 15:36:52 +0200 Message-Id: <1166621812.3939.26.camel@sauron> Mime-Version: 1.0 Content-Transfer-Encoding: quoted-printable Cc: linux-mtd@lists.infradead.org Reply-To: dedekind@infradead.org List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On Wed, 2006-12-20 at 18:49 +0530, Darshak wrote: > Hi, >=20 > I have read that INTEL has strataflash. >=20 > Is it bare NAND/nor file system?what is its basic use in Linksys? >=20 > =20 >=20 > What file system does it use? Can we have JFFS2 for that ? >=20 > =20 >=20 > What is difference in CF flash/DOC flash and this INTEL flash .? >=20 > =20 >=20 >=20 >=20 > Thanxs! >=20 > =20 >=20 >=20 > ______________________________________________________ I see you use some progressive formula for number of line brakes at the end of each line. But I cannot figure out which one. If number of brakes is y, while the number of line is x, we have the following data for y(x): y(0) =3D 2 y(1) =3D 2 y(2) =3D 4 y(3) =3D 4 y(5) =3D 6 y(6) =3D 5 What's the formula? --=20 Best regards, Artem Bityutskiy (=D0=91=D0=B8=D1=82=D1=8E=D1=86=D0=BA=D0=B8=D0=B9 =D0=90= =D1=80=D1=82=D1=91=D0=BC)