* [mtd-utils patch 2/2] Add favourlzo compression mode
@ 2007-03-01 12:08 Richard Purdie
0 siblings, 0 replies; 3+ messages in thread
From: Richard Purdie @ 2007-03-01 12:08 UTC (permalink / raw)
To: linux-mtd
Add a favourlzo compression mode to mtd-utils
This allows lzo compression to be used in the cases where the
compression ratio isn't quite as good zlib. This can make sense in
certain use cases because LZO decompression is much faster than zlib.
Signed-off-by: Richard Purdie <rpurdie@openedhand.com>
---
compr.c | 52 +++++++++++++++++++++++++++++++++++++++++++++++++---
compr.h | 1 +
2 files changed, 50 insertions(+), 3 deletions(-)
Index: git/compr.c
===================================================================
--- git.orig/compr.c 2007-03-01 11:58:01.000000000 +0000
+++ git/compr.c 2007-03-01 11:58:09.000000000 +0000
@@ -16,6 +16,8 @@
#include <stdlib.h>
#include <linux/jffs2.h>
+#define FAVOUR_LZO_PERCENT 80
+
extern int page_size;
/* LIST IMPLEMENTATION (from linux/list.h) */
@@ -166,6 +168,33 @@ static void jffs2_decompression_test(str
}
}
+/*
+ * Return 1 to use this compression
+ */
+static int jffs2_is_best_compression(struct jffs2_compressor *this,
+ struct jffs2_compressor *best, uint32_t size, uint32_t bestsize)
+{
+ switch (jffs2_compression_mode) {
+ case JFFS2_COMPR_MODE_SIZE:
+ if (bestsize > size)
+ return 1;
+ return 0;
+ case JFFS2_COMPR_MODE_FAVOURLZO:
+ if ((this->compr == JFFS2_COMPR_LZO) && (bestsize > size))
+ return 1;
+ if ((best->compr != JFFS2_COMPR_LZO) && (bestsize > size))
+ return 1;
+ if ((this->compr == JFFS2_COMPR_LZO) && (bestsize > (size * FAVOUR_LZO_PERCENT / 100)))
+ return 1;
+ if ((bestsize * FAVOUR_LZO_PERCENT / 100) > size)
+ return 1;
+
+ return 0;
+ }
+ /* Shouldn't happen */
+ return 0;
+}
+
/* jffs2_compress:
* @data: Pointer to uncompressed data
* @cdata: Pointer to returned pointer to buffer for compressed data
@@ -231,21 +260,29 @@ uint16_t jffs2_compress( unsigned char *
}
if (ret == JFFS2_COMPR_NONE) free(output_buf);
break;
+ case JFFS2_COMPR_MODE_FAVOURLZO:
case JFFS2_COMPR_MODE_SIZE:
orig_slen = *datalen;
orig_dlen = *cdatalen;
list_for_each_entry(this, &jffs2_compressor_list, list) {
+ uint32_t needed_buf_size;
+
+ if (jffs2_compression_mode == JFFS2_COMPR_MODE_FAVOURLZO)
+ needed_buf_size = orig_slen+jffs2_compression_check;
+ else
+ needed_buf_size = orig_dlen+jffs2_compression_check;
+
/* Skip decompress-only backwards-compatibility and disabled modules */
if ((!this->compress)||(this->disabled))
continue;
/* Allocating memory for output buffer if necessary */
- if ((this->compr_buf_size<orig_dlen+jffs2_compression_check)&&(this->compr_buf)) {
+ if ((this->compr_buf_size < needed_buf_size) && (this->compr_buf)) {
free(this->compr_buf);
this->compr_buf_size=0;
this->compr_buf=NULL;
}
if (!this->compr_buf) {
- tmp_buf = malloc(orig_dlen+jffs2_compression_check);
+ tmp_buf = malloc(needed_buf_size);
if (!tmp_buf) {
fprintf(stderr,"mkfs.jffs2: No memory for compressor allocation. (%d bytes)\n",orig_dlen);
continue;
@@ -265,7 +302,8 @@ uint16_t jffs2_compress( unsigned char *
if (!compr_ret) {
if (jffs2_compression_check)
jffs2_decompression_test(this, data_in, this->compr_buf, *cdatalen, *datalen, this->compr_buf_size);
- if ((!best_dlen)||(best_dlen>*cdatalen)) {
+ if (((!best_dlen) || jffs2_is_best_compression(this, best, *cdatalen, best_dlen))
+ && (*cdatalen < *datalen)) {
best_dlen = *cdatalen;
best_slen = *datalen;
best = this;
@@ -377,6 +415,9 @@ char *jffs2_stats(void)
case JFFS2_COMPR_MODE_SIZE:
act_buf += sprintf(act_buf,"size");
break;
+ case JFFS2_COMPR_MODE_FAVOURLZO:
+ act_buf += sprintf(act_buf,"favourlzo");
+ break;
default:
act_buf += sprintf(act_buf,"unkown");
break;
@@ -413,6 +454,11 @@ int jffs2_set_compression_mode_name(cons
jffs2_compression_mode = JFFS2_COMPR_MODE_SIZE;
return 0;
}
+ if (!strcmp("favourlzo", name)) {
+ jffs2_compression_mode = JFFS2_COMPR_MODE_FAVOURLZO;
+ return 0;
+ }
+
return 1;
}
Index: git/compr.h
===================================================================
--- git.orig/compr.h 2007-03-01 11:58:01.000000000 +0000
+++ git/compr.h 2007-03-01 11:58:09.000000000 +0000
@@ -32,6 +32,7 @@
#define JFFS2_COMPR_MODE_NONE 0
#define JFFS2_COMPR_MODE_PRIORITY 1
#define JFFS2_COMPR_MODE_SIZE 2
+#define JFFS2_COMPR_MODE_FAVOURLZO 3
#define kmalloc(a,b) malloc(a)
#define kfree(a) free(a)
^ permalink raw reply [flat|nested] 3+ messages in thread* [mtd-utils patch 2/2] Add favourlzo compression mode
@ 2007-07-10 15:03 Richard Purdie
2007-07-23 14:23 ` Josh Boyer
0 siblings, 1 reply; 3+ messages in thread
From: Richard Purdie @ 2007-07-10 15:03 UTC (permalink / raw)
To: linux-mtd, Josh Boyer
Add a favourlzo compression mode to mtd-utils
This allows lzo compression to be used in the cases where the
compression ratio isn't quite as good zlib. This can make sense in
certain use cases because LZO decompression is much faster than zlib.
Signed-off-by: Richard Purdie <rpurdie@openedhand.com>
---
compr.c | 52 +++++++++++++++++++++++++++++++++++++++++++++++++---
compr.h | 1 +
2 files changed, 50 insertions(+), 3 deletions(-)
Index: git/compr.c
===================================================================
--- git.orig/compr.c 2007-03-01 11:58:01.000000000 +0000
+++ git/compr.c 2007-03-01 11:58:09.000000000 +0000
@@ -16,6 +16,8 @@
#include <stdlib.h>
#include <linux/jffs2.h>
+#define FAVOUR_LZO_PERCENT 80
+
extern int page_size;
/* LIST IMPLEMENTATION (from linux/list.h) */
@@ -166,6 +168,33 @@ static void jffs2_decompression_test(str
}
}
+/*
+ * Return 1 to use this compression
+ */
+static int jffs2_is_best_compression(struct jffs2_compressor *this,
+ struct jffs2_compressor *best, uint32_t size, uint32_t bestsize)
+{
+ switch (jffs2_compression_mode) {
+ case JFFS2_COMPR_MODE_SIZE:
+ if (bestsize > size)
+ return 1;
+ return 0;
+ case JFFS2_COMPR_MODE_FAVOURLZO:
+ if ((this->compr == JFFS2_COMPR_LZO) && (bestsize > size))
+ return 1;
+ if ((best->compr != JFFS2_COMPR_LZO) && (bestsize > size))
+ return 1;
+ if ((this->compr == JFFS2_COMPR_LZO) && (bestsize > (size * FAVOUR_LZO_PERCENT / 100)))
+ return 1;
+ if ((bestsize * FAVOUR_LZO_PERCENT / 100) > size)
+ return 1;
+
+ return 0;
+ }
+ /* Shouldn't happen */
+ return 0;
+}
+
/* jffs2_compress:
* @data: Pointer to uncompressed data
* @cdata: Pointer to returned pointer to buffer for compressed data
@@ -231,21 +260,29 @@ uint16_t jffs2_compress( unsigned char *
}
if (ret == JFFS2_COMPR_NONE) free(output_buf);
break;
+ case JFFS2_COMPR_MODE_FAVOURLZO:
case JFFS2_COMPR_MODE_SIZE:
orig_slen = *datalen;
orig_dlen = *cdatalen;
list_for_each_entry(this, &jffs2_compressor_list, list) {
+ uint32_t needed_buf_size;
+
+ if (jffs2_compression_mode == JFFS2_COMPR_MODE_FAVOURLZO)
+ needed_buf_size = orig_slen + jffs2_compression_check;
+ else
+ needed_buf_size = orig_dlen + jffs2_compression_check;
+
/* Skip decompress-only backwards-compatibility and disabled modules */
if ((!this->compress)||(this->disabled))
continue;
/* Allocating memory for output buffer if necessary */
- if ((this->compr_buf_size<orig_dlen+jffs2_compression_check)&&(this->compr_buf)) {
+ if ((this->compr_buf_size < needed_buf_size) && (this->compr_buf)) {
free(this->compr_buf);
this->compr_buf_size=0;
this->compr_buf=NULL;
}
if (!this->compr_buf) {
- tmp_buf = malloc(orig_dlen+jffs2_compression_check);
+ tmp_buf = malloc(needed_buf_size);
if (!tmp_buf) {
fprintf(stderr,"mkfs.jffs2: No memory for compressor allocation. (%d bytes)\n",orig_dlen);
continue;
@@ -265,7 +302,8 @@ uint16_t jffs2_compress( unsigned char *
if (!compr_ret) {
if (jffs2_compression_check)
jffs2_decompression_test(this, data_in, this->compr_buf, *cdatalen, *datalen, this->compr_buf_size);
- if ((!best_dlen)||(best_dlen>*cdatalen)) {
+ if (((!best_dlen) || jffs2_is_best_compression(this, best, *cdatalen, best_dlen))
+ && (*cdatalen < *datalen)) {
best_dlen = *cdatalen;
best_slen = *datalen;
best = this;
@@ -377,6 +415,9 @@ char *jffs2_stats(void)
case JFFS2_COMPR_MODE_SIZE:
act_buf += sprintf(act_buf,"size");
break;
+ case JFFS2_COMPR_MODE_FAVOURLZO:
+ act_buf += sprintf(act_buf, "favourlzo");
+ break;
default:
act_buf += sprintf(act_buf,"unkown");
break;
@@ -413,6 +454,11 @@ int jffs2_set_compression_mode_name(cons
jffs2_compression_mode = JFFS2_COMPR_MODE_SIZE;
return 0;
}
+ if (!strcmp("favourlzo", name)) {
+ jffs2_compression_mode = JFFS2_COMPR_MODE_FAVOURLZO;
+ return 0;
+ }
+
return 1;
}
Index: git/compr.h
===================================================================
--- git.orig/compr.h 2007-03-01 11:58:01.000000000 +0000
+++ git/compr.h 2007-03-01 11:58:09.000000000 +0000
@@ -32,6 +32,7 @@
#define JFFS2_COMPR_MODE_NONE 0
#define JFFS2_COMPR_MODE_PRIORITY 1
#define JFFS2_COMPR_MODE_SIZE 2
+#define JFFS2_COMPR_MODE_FAVOURLZO 3
#define kmalloc(a,b) malloc(a)
#define kfree(a) free(a)
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [mtd-utils patch 2/2] Add favourlzo compression mode
2007-07-10 15:03 Richard Purdie
@ 2007-07-23 14:23 ` Josh Boyer
0 siblings, 0 replies; 3+ messages in thread
From: Josh Boyer @ 2007-07-23 14:23 UTC (permalink / raw)
To: Richard Purdie; +Cc: linux-mtd
On 7/10/07, Richard Purdie <rpurdie@openedhand.com> wrote:
> Add a favourlzo compression mode to mtd-utils
>
> This allows lzo compression to be used in the cases where the
> compression ratio isn't quite as good zlib. This can make sense in
> certain use cases because LZO decompression is much faster than zlib.
>
> Signed-off-by: Richard Purdie <rpurdie@openedhand.com>
Applied.
josh
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2007-07-23 14:23 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-03-01 12:08 [mtd-utils patch 2/2] Add favourlzo compression mode Richard Purdie
-- strict thread matches above, loose matches on Subject: below --
2007-07-10 15:03 Richard Purdie
2007-07-23 14:23 ` Josh Boyer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox